December 7, 2019

E-Newsletter

Industry Links

Adhesives

PSAs Offered

Published: September 01, 2010
Three new technologies are available. Micronax microsphere repositionable adhesives are said to provide a high degree of repositionability of any type

Flex-Pack Subject of Symposium

Published: September 01, 2010
H.B. Fuller To Hostl Flexible Packaging Symposium with Nordmeccanica Super Combi 3000 Laminator Demonstration

Adhesive Helps Reduce Waste

Published: September 01, 2010
Technomelt Supra Cool 130 packaging adhesive reportedly offers benefits that include high bond strength, thermal stability, and flowability, as well as

H.B. Fuller To Hold Flexible Packaging Symposium

Published: August 16, 2010
H.B. Fuller will host a Flexible Packaging Symposium focused on the future of flexible packaging on September 22 at the company’s St. Paul, MN, headquarters

Adhesives Are Sticky And Versatile

Published: August 01, 2010
Ultra-removable microsphere technology features tiny spheres invisible to the human eye. Microsphere adhesives are said to be powerfully sticky orbs that

Pressure-Sensitive Coating: Ready & Able

Published: August 01, 2010, By By Edward Boyle, Contributing Editor
When Lou Guzzetti took over as chairman and CEO of what was then Spinnaker Industries in spring 2001, what he was stepping into wasn't exactly a bed of

Adhesive Adheres to Textured Surfaces

Published: July 01, 2010
SureLock permanent adhesive is designed to adhere to textured surfaces, reportedly without being gummy or leggy. Adhesive is said to exhibit high tack

Spinnaker Coating Launches SureLock Adhesive

Published: June 02, 2010
Spinnaker Coating introduces SureLock permanent adhesive specifically designed to adhere to textured surfaces without being gummy or leggy

H.B. Fuller Offers Trials on Nordmeccanica Laminator

Published: June 01, 2010
ST. PAUL, MN | H.B. Fuller Co. has installed a Nordmeccanica Super Combi 3000 laminator at its Research, Development, and Technical Service Center. By

Adhesives Aid Fast Manufacturing

Published: May 01, 2010
The Liofol UR2790-22/UR5026-21 adhesive system allows converters to produce laminated films, then roll, slit, pouch, and ship to food processors faster

Laminator Aids Productivity

Published: April 01, 2010
The Liofol LA7724-21/UR6020 solventless laminating system is designed for use in standard and medium performance film/film and film/foil food packaging

Chip Offers Fast Melt Rate

Published: March 01, 2010
The WizChip hot melt adhesive chip utilizes company's proprietary adhesive chemistry for an optimum quick melt rate. Flat-rounded chip is said to offer

PSA Line Expands

Published: March 01, 2010
Expanded line of acrylic transfer PSAs includes the 600 Series (high shear, moderate LSE, and high-temperature shear); 800 Series (lower cost, high peel,

Hot Melt PSAs Are 'Green'

Published: March 01, 2010
The Acrynax adhesives line of acrylic polymer hot melt PSAs is said to be good for both the environment and costs. This environmentally safe alternative

Hoses Keep Adhesives Warm

Published: March 01, 2010
RTD-controlled, heated hoses maintain water-based adhesives at a constant warm temperature. This means the glue valves operate properly, less product

PSA Ideal for Clear Film Applications

Published: March 01, 2010
Water-based Covinax 462 is a permanent pressure-sensitive adhesive (PSA) said to be ideal for clear film applications that demand no hazing or blushing of the adhesive-coated film

3M Selects KAPCO

Published: February 01, 2010
KENT, OH KAPCO (Kent Adhesive Products Co.) has been selected as a Preferred Converter and Distributor of 3M's Renewable Energy Div. (RED), St. Paul,

Apply Hot Melt Reliably

Published: February 01, 2010
PURBlue 4 adhesive melters are moisture-cure reactive hot melt application systems. Melters heat only a small amount of adhesive as needed, reducing thermal

Hot Melt Needs No Primary Coat

Published: January 01, 2010
PS 1210 hot melt adhesive is said to improve the performance of products for applications. Reportedly demonstrates an exceptionally low penetration behavior

Adhesive Is Applied With No Contact

Published: December 01, 2009
The Corrutack 2 adhesive applicator system for flap gluing is able to glue on the operating and/or drive side of machine. Stations can be installed on

Dispense Adhesives with Clean Cutoff

Published: December 01, 2009
PUR adhesive dispensing system is said to install easily on existing folder/gluers as well as on new equipment. Comprising a PURBlue 4 slug melter and

Do It Yourself

Published: December 01, 2009, By By Edward Boyle, Contributing Editor
In these challenging economic times, reducing costs can be as important as increasing sales. Well, almost. And while adhesives and coatings may account

Adhesives Offer Economies

Published: December 01, 2009
PolyTak hot melt adhesives are said to offer excellent paper and paperboard substrate adhesion. With set properties ranging from medium to fast, adhesives

Get Adhesive Removability

Published: November 01, 2009
Repositionable micronax micro sphere technology is said to bring a new level of repositionability to adhesives for use in many applications. The technology

Partnership for Eco Packaging Launched

Published: September 01, 2009
Henkel announces a joint agreement with LBP Mfg., Cicero, IL, to combine R&D resources to develop coatings, barriers, laminates, and adhesives

H.B. Fuller Buys Nordic

Published: May 01, 2009
H.B. Fuller Co. has acquired Nordic Adhesives Technology

Henkel Acquires National Adhesives

Published: December 01, 2008
Bridgewater, NJ | Henkel Corp. has acquired the National Adhesives business of National Starch and Chemical Co. This acquisition enables Henkel to offer

Open House Presents Solvent-Free Adhesives

Published: July 01, 2008
LONG ISLAND, NY Nordmeccanica held an open house on April 10 at its Long Island location in which two new solvent-free adhesives from Rohm & Haas were

The place

Published: November 01, 2007, By David J. Bentley, Jr., Editor
EXECUTIVE SUMMARY Troubleshooting Extrusion Processes With Hands-On Computational Proceduresby Natti S. Rao, Plastics Solutions International Consulting

Knowledge = Power = Success

Published: June 01, 2007, By By Edward Boyle, Contributing Editor
Training. It's as essential to the growth and vitality of a converting operation as air and water are to all living things. Many companies have in-depth,

Resources

Subscribe to PFFC's EClips Newsletter