Search
- Materials
- (Magazine)
- February 27, 2005, ... paper and synthetic paper substrates. Can print on a variety of substrates, including coated paper, PE, PP, polyolefin, Kimdura, Valeron, Polyart, and Kromekote. Said to demonstrate excellent smear resistance ...
- Reporter Clips
- (Magazine)
- February 27, 2005, ... four quart-size labels, six pint-size labels, and four milk shake labels. The labels are gravure printed in ten colors. Tapes Blend Benefits RIVERHEAD, NY—Two double-coated tapes from Adchem ...
- Hot Melt Adhesive Use
- (Magazine)
- February 27, 2005, ... it is not very fluid, it will have poor wetout and flow. This can cause poor adhesion to the substrate onto which the hot melt adhesive is being coated. It also can cause poor coating weight control. ...
- Film Opens New Markets
- (Magazine)
- February 27, 2005, ... at a concentration of 120 ppm, each coated film was tested for ruboff and cure stability. The results of these tests are shown in Table II. Tabel II Silicone Adhesion Data—Pt Cured Material Adhesion ...
- Converting Industry News, Part 1
- (Magazine)
- February 27, 2005, ... the substrate, which combines a bright-white coated facing stock with a kraft board. He prepared printed carton samples for the Board, who liked the look but were concerned about giving up the strength ...
- Converting Industry News, Part 2
- (Magazine)
- February 27, 2005, ... full line of Ceramis transparent SiOx-coated, high-barrier films from Alcan Packaging. Ceramis films are manufactured by the EB evaporation of silicon oxide onto PET, nylon, and OPP substrates, offering ...
- Rotary Screen Printings Contribution to RFID
- (Archive)
- January 30, 2005, ... Etching is restricted to filmic substrates since paper does not survive the process. First, the substrate is coated with wither copper or aluminium. The etch-resistant UV-based ink, 30 µm thick, is printed ...
- A Communication from the PLACE div. of TAPPI
- (Magazine)
- January 30, 2005, ... coated with the oxygen barrier primer at a pilot coating facility using direct gravure application. Based on barrier testing, the various primer/metal combinations tested in this work provide excellent ...
- E-Clips Top 10
- (Magazine)
- January 30, 2005, ... Teflon-coated surface allows film to float better with less air volume, company says, preventing a "pillowing" effect above the blade holder. This will reduce edge wrinkles and allow better layflat control. ...
- Narrow Web Reporter
- (Magazine)
- December 30, 2004, ... mounting nameplates and for bonding relatively smooth surfaces. The 2-mil tape exhibits minimum 180-deg peel and loop tack values of 40 oz/in. and 32 oz/in., respectively. The tape, which uses a 60# polycoated ...
- Coating & Laminating Special Report, Part 3
- (Archive)
- December 30, 2004, ... of coated and uncoated papers—primarily for self-adhesive labels—and "imports" of medium to high wet strength coated papers for glue-applied labels for beverages. However, we expect to see further development ...
- Coating & Laminating Special Report, Part 4
- (Archive)
- December 30, 2004, Elizabeth Park provides an overview of the current status of self-adhesive laminates in the graphic arts industry. Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 6 Under Pressure: Self Adhesive ...
- Converting Industry News, Part 1
- (Magazine)
- November 29, 2004, ... Group, and the sheeter is now known as the Apollo.) The Apollo TSK, installed early in 2004, converts a range of plain and coated paper and board and is said to be especially efficient on small sheet ...
- New Product Digest, Part 2
- (Magazine)
- November 29, 2004, ... can be used with or without IR heaters and is ideal for coated and uncoated paper and paperboard; Fast-Setting 3030 is suitable for coated and uncoated papers and paperboard, as well as for foil stamping; ...
- Celplast Metallized Products Named Exclusive NA Distributor of Alcan's Ceramis Film Product
- (Archive)
- November 01, 2004, ... Celplast Metallized Products reports it is Alcan Packaging’s exclusive North American agent/distributor for the entire line of Ceramis films. According to Celplast, these transparent SiOx coated high-barrier ...
- The Gold Standard
- (Magazine)
- October 30, 2004, ... This job is produced with 200-line screen registration, which is difficult for four-color printing with no border support. Water-based inks are used. Suppliers include Wausau Coated Products, Arcar, ...
- Extrusion Dies
- (Magazine)
- October 30, 2004, ... material. Longer Lands for Enhanced Control Another way to save on raw material costs and to improve the quality and consistency of coated products is to increase control over coating properties as ...
- What's New in Narrow We
- (Magazine)
- September 29, 2004, ... topcoated, conformable product is positioned as a lower-cost alternative for semi-squeeze p-s applications on PE or PP containers. Said to offer high printability with conventional UV and water-based flexo ...
- Materials
- (Magazine)
- September 29, 2004, ... C1S and C2S Gloss Envelope Papers reportedly make graphics stand out. C1S is said to feature excellent bulk and stiffness for improved convertibility and an uncoated surface suitable for four-color printing. ...
- Products, Part 1
- (Magazine)
- September 29, 2004, ... inner shoe. Film “walks” down the blade, pulling tension on the film and reportedly making a better cut. Dimpled Teflon-coated surface allows film to float better with less air volume, company says, preventing ...