Search

Erema Introduces Plastics Recycling System

(Flexpack News)

November 19, 2013, The INTAREMA system, featuring Counter Current technology and Smart Start control, is said to increase production rates and consistency   ANSFELDEN, AUSTRIA | Erema has introduced INTAREMA, a plastics ...

On Print | Conductive Inks & Coatings

(Coatings)

February 21, 2013, ... conductivity comparable to a wire. Nanoparticles are close to this objective. They also can be fused at comparatively low temperatures in very short times, on, for example polyester and paper. Applications ...

Coating Matters | Understanding Rheology

(Coating/Laminating)

October 01, 2012, ... most plastics in the melt phase behave just like this tasty sandwich spread. Both plastics and mayo are solid at room temperature and liquid when broken by a shear force, which is a force applied in the ...

Labelexpo Americas | Mission Possible

(Label/Tape)

July 12, 2012, ... couple with the cost-effectiveness of low-temperature cure at low platinum levels. They can be used on a wide variety of paper substrates. Dow Corning 7651 Adhesive and Dow Corning 7652 Adhesive support ...

Henkel Labeling Adhesives are Casein-Free

(Adhesives)

March 03, 2012, ... life and temperature stability, feature exceptionally good initial tack, and support fast setting and drying, thus helping to reduce adhesive usage rates. Adhesives exhibit good adhesion even to chilled ...

Dyna-Purge System Purges High-Temp Resins

(Coating/Laminating)

February 08, 2012, The New Dyna-Purge E2 for purging high-temperature resins has been tested for effectiveness in an independent study, and the results are positive DEPEW (BUFFALO), NY | The Dyna-Purge Div. of Shuman ...

Overlaminating Films Resist Heat

(Flexpack)

July 31, 2011, XL-1600 and XL-1601 high-temperature, clear overlaminating films reportedly offer high heat resistance, dimensional stability, and excellent resistance XL-1600 and XL-1601 high-temperature, clear overlaminating ...

Process Troubleshooting

(Coating/Laminating)

October 31, 2010, ... The issues (typically downweb in form) include contamination, air entrapment, and temperature control. Substrate and substrate delivery: In substrate delivery, the equipment variables to be monitored ...

Coating Tech Service Presents at AIMCAL Fall Tech Conference

(Coating/Laminating News)

October 13, 2010, ... in all layers of the final product to equilibrium. Coated or laminated paper processes typically require high temperature curing which creates moisture imbalances between the paper substrate and the coating ...

Pilot Coaters: Small Volume, Big Advances

(Coating/Laminating)

September 30, 2010, ... ±0.2% Low solution volume Programmable thickness in cc/cm2, cc/m2, cc/ft2, mg/ft2, mg/m2 Programmable temperature (independent controls for die and pump) Maximum coated area of 2,910 cm2 for 27.9-cm ...

Adhesive Helps Reduce Waste

(Adhesives)

August 31, 2010, ... offers benefits that include high bond strength, thermal stability, and flowability, as well as a broad application spectrum, all at a processing temperature of 130 deg C in the melter. The technology ...

Flexpack: DuPont Honors Innovation

(Flexpack)

May 31, 2010, ... packaging system, designed to ensure the safe transport of medical supplies. The greatest challenge in shipping temperature-sensitive materials, such as pharmaceuticals or blood supplies, is maintaining ...

Blade Coatings: Prolong Blade Life

(Slit)

May 31, 2010, ... building the final result and providing greater control over thickness and uniformity. The processes and equipment used allow the blades to be coated at temperatures less than 250 deg, in many applications, ...

Blown Film: Measuring Melt Temps

(Controls)

February 28, 2010, ... is a melt temperature variation coming off your screw tip, the die and air ring will not correct it no matter how fancy or advanced they may be. Measuring and understanding the extrudate variation is ...

Paper or Plastic?

(Archive)

November 30, 2009, ... formulation is a critical component of release liner, delivering a combination of release properties, water repellency, temperature resistance, and many other special functions for the main market, self-adhesive ...

Films 101: Back to Basics

(Archive)

November 30, 2009, ... efficient and economical dispensing; however, it becomes stiff at high calipers, and its temperature and tension must be closely controlled during converting. BOPP films can be difficult to print because ...

100% Recyclable CPET Trays Provide Sustainability Benefits

(News Eclips)

September 30, 2009, ... protection of multi-layer PP trays, as well as superior dimensional stability. Compared to PP, CPET features dual ovenability and a wide temperature tolerance from -40F degrees to 400F degrees, for freezer-to-oven ...

WHAT'S NEW PRODUCT

(New Products)

September 30, 2009, ...  Circle 424 or visit www.freeproductinfo.net/pff Heat Transfer Line Expands The M2 metal fiber replacement emitter expands on company's line of heat transfer products. Utilizes high-temperature alloy ...

WHAT'S NEW PRODUCTS: April 200

(New Products)

March 31, 2009, ... to monitor the output of the sensor and enjoy measurement with no concerns about noise, temperature variation, or power supply requirement. Software allows output monitoring in real time. Said to have ...

Bloomer Plastics Converts Custom Films

(Substrates)

February 28, 2009, ... in no dioxin or acid formation when incinerated, are recyclable, and heat sealable under a broad range of temperatures, and can be made to be biodegradable. Growth in Laminations Bloomer Plastics offers ...