Search
- the PLACE
- (Magazine)
- November 30, 2006, ... initial bonds and shear strength are significantly lower than those obtained with solvent based analogs. Laminating equipment with sensitive tension control and rewind systems is therefore necessary to ...
- Labelexpo New Products
- (Magazine)
- October 31, 2006, ... and shift with changes in viewing angle, light source, and the environment. Film may be embossed, die-cut, shear slit, precision cut, surface treated, dyed, coated or laminated with adhesive, printed, ...
- New Products
- (Magazine)
- October 31, 2006, ... unwind shafts; simple tension controls; and score or shear cross-cut and razor, score, or shear slitting. Standard accuracy is ±1/32 in. over 36-in. feed. Optional upgrades are available. PFFC-ASAP 463 ...
- CPP: Season Two
- (Magazine)
- September 30, 2006, ... and not just reacting to defect incidents as they occur. The program should be applied to both new and existing products. Shear Slitting — Refining the Process 9:00-9:50 A.M. Reducing Slitter ...
- What's Ne
- (Magazine)
- September 30, 2006, ... and chemical resistance typical to solvent adhesives, with excellent laminating performance even on CPP films and laminate constructions with aluminum foil. High-shear adhesives allow further processing ...
- the PLACE
- (The Place)
- September 30, 2006, ... Company APPLICATION: Pressure drops across process control valves and die plates can measure viscosity at different shear rates allowing prediction of MW and MWD to control a process. In polyethylene ...
- Difficult Winding: Part II
- (Web Lines)
- August 31, 2006, ... isn't uniform, the web will shear and buckle, creating a defect called slip knots commonly seen in uncoated, smooth films. My advice on these three winding challenges (isotropic modulus, large buildups, ...
- Pack Expo Presentation Highlights Improvements for Packaging Lamination
- (Archive)
- July 31, 2006, ... adhesion performances similar or better than solvent-based urethane adhesives. Specifically, water-based acrylic adhesives exhibited good performance in all areas tested, including shear resistance, adhesion ...
- New Products, Part 2
- (Magazine)
- May 30, 2006, ... Knives Lund Precision Products, Hudson, MA; 978/562-4444; lundonline.com BrazeCoat ultra-high-density carbide coating can be applied to shear bars (stationary knives) to improve wear resistance and service ...
- Reporter Clips
- (Magazine)
- May 30, 2006, ... bonding applications in transportation and appliance industries requiring insulation and sound reduction. Tape features a high-tack, high-peel, moderate shear rubber-based adhesive coating on the liner ...
- A Communication from the PLACE Div. of TAPPI
- (Magazine)
- April 29, 2006, ... been previously investigated. PPAs condition faster in narrow die gaps compared with wider die gaps indicating that the PPA coating mechanism is partly dependent on the shear rate at the die wall at least ...
- Optimize Slitter Performance
- (Archive)
- March 12, 2006, ... Reinhold Schable will describe the fundamentals and latest elements of shear slitting processes and provide an interactive Q & A session. To register for this free event, visit maxcessintl.com/eseminar. ...
- Slitting New Product Digest
- (Magazine)
- February 27, 2006, ... between modes. The unit slits down to a minimum width of 20 mm when using razor and 30 mm with rotary shear knives. SUPPLIER INFO: Ashe Converting Equipment—ashe.co.uk Knife Holder Aids ...
- A Communication from the PLACE Div. of TAPPI
- (Magazine)
- January 30, 2006, ... to appear rough with diminished physical and optical properties. Typically, melt fracture occurs when polymer melt is forced to flow through narrow die chambers at elevated shear stress levels. Traditionally ...
- Slitting & Rewinding Fundamentals for Converters
- (Archive)
- October 31, 2005, ... PFFC columnist, Tim Walker. Topics include: Winding Techniques Specifying a Slitter/Rewinder/Salvage Rewinder Winding Defects Machine Safety Shear Slitting—Refining the Process Crush Slitting ...
- A Communication from the PLACE Div. of TAPPI
- (Magazine)
- October 30, 2005, ... correlate haze with overall melt elasticity in terms of recoverable shear strain were unsuccessful. The reason is that the mechanism by which surface roughness has been modified by the presence of LDPE ...
- To Serve & Protect
- (Magazine)
- October 30, 2005, ... is formed. Avoid high shear so you can achieve maximum stability. Use only recommended application techniques: reverse gravure, smooth roll Mayer rod, fountain-less gravure with smoothing rollers, or ...
- Narrow Web New Products
- (Magazine)
- October 30, 2005, ... printing offers nonstop unwinding technology. Patented rolling shear splice unit guarantees a clean cut, no overlap, and a tight bond. Tension control system features inertia compensation for consistent, ...
- RFID: The Next Generation
- (Magazine)
- September 29, 2005, ... sounds insane. So 20 to 40 percent really scares them off, ” says Cerc. “Everybody expected 2005 would be the year when huge volumes would be produced…and it hasn’t happened. So it becomes a little disheartening ...
- New Products
- (Magazine)
- August 30, 2005, ... is capable of handling several different types of films and laminates. Reported benefits include a high degree of automation; reduced roll changeover time; shear and razor slit options; independent tension ...