Search
- Mixing It Up
- (Archive)
- November 30, 2003, ... and an upper limit. Specifications quantify the requirements for a mixing process. Examples include: Concentration of all chemical species Temperature of mixed solution Completeness of chemical ...
- The Power of Three
- (Tapes)
- November 29, 2003, ... tunnel has independent temperature controls. Press has one-touch electronic controls. “There are a lot of things to like about the press,” explains Ashworth. “The set-up, the dryers, the better controls. ...
- What Works Best?
- (Magazine)
- October 31, 2003, ... operate at top speeds of 3,100 fpm for film and 1,800 fpm for boardstock. Using Eurotherm drives for instrumentation and temperature control, and an NDC gauging system to control tension, the Beloit ...
- Cast Film Lines for Barrier Films
- (The Place)
- October 31, 2003, ... the secondary chill roll. An essential requirement is constant temperature across the entire face width of the rolls within tolerances of ± 1°K. Barrier films require a higher temperature for cooling to ...
- Drug Dispensers
- (Archive)
- September 30, 2003, ... physical conditions and physiological changes are underway. Current investigations are focused on bodily changes such as temperature and perspiration rate that may signal the need for higher or lower rates ...
- Meeting the Need
- (Materials)
- September 30, 2003, ... used blister films and foils, including PVC, PVDC-coated PVC, and PET. Described as the only commercially available paperboard that seals consistently to Aclar, product reportedly seals at lower temperatures ...
- Producing Coextruded High Barrier Heat-Shrinkable Packaging Films
- (The Place)
- September 30, 2003, ... bath. Proprietary devices such as water-cooled mandrels can cool the internal film surface. The temperature variation around the tube circumference should not exceed ± 1°C, or the gauge distribution will ...
- Products
- (Magazine)
- September 29, 2003, ... plasma are less affected by long-term exposure to temperature and humidity. Low-Profile Load Cell Is Cooler, Lasts Longer Cleveland Motion Controls, Cleveland, OH; 216/524-8800; cmccontrols.com The ...
- Adhesion of Coatings to Aluminum Foil
- (The Place)
- August 31, 2003, ... a continuous amorphous oxide layer forms immediately due to the reaction between oxygen and humidity from the environment and the freshly generated metal surface. During annealing at temperatures of approximately ...
- Products
- (Magazine)
- August 31, 2003, ... specially formulated two-component compound is said to offer good properties in surface energy/tension, abrasion resistance, and temperature resistance. Ink transfer ability achieves density levels previously ...
- Materials
- (Materials)
- July 31, 2003, ... necessary. Canisters contain less than 2% residual waste at the end of a print cycle, and overall ink waste is said to be reduced by 80%-90%. Laminating Adhesive Suited to High Temperatures Rohm & ...
- Products
- (Magazine)
- July 31, 2003, ... temperature control, digital recognition of sensors, real-time multisensor data output, and a dynamic speed range of 20,000:1 for quick QA/QC testing or detailed research. Software Helps Manage Energy ...
- Active Packaging
- (Flexpack)
- July 31, 2003, ... to food packages can take several forms. The agents may be added, for example, at the extruder when the film or coextrusion is produced. High temperatures and extruder shear can cause deterioration in ...
- Testing Equipment: Does Your Lab Measure Up?
- (Magazine)
- July 31, 2003, ... tester to select the travel length and speed of the test, and program the dwell time, Young adds. Options such as temperature control of the test bed, accessories such as a glass plate surface (an ASTM ...
- Reporter Clips
- (Magazine)
- June 30, 2003, ... automatically or manually. A variety of packet formulations address the individual needs of dry, oily, or moist foods; low-temperature foods; or delicate foods. Space-saving, p-s AGELESS slim-line label-format ...
- FTA Raises the Bar
- (Magazine)
- June 30, 2003, ... the exposure bed temperature is lowered and controlled, oxygen migration to exposing areas is regulated effectively, and the oxygen depletion effect is not seen. The temperature of the exposure bed should ...
- Cyclic-Olefinic Copolymers as Non-Migrating, Polymeric Slip Additives in LDPE Cast Films
- (Magazine)
- June 30, 2003, ... Low level dosing of COC into polyethylenes with the use of “lower” temperature processing conditions can make COC materials viable alternatives for COF reduction. COC materials may or may not be “miscible” ...
- Materials
- (Materials)
- June 29, 2003, ... hbfuller.com PHF-0975 low-temperature, activatable hot melt heat-seal coating line contains a wide array of products for specific niche requirements, including lidding, multipack overwraps, and other ...
- What's New in Narrow We
- (Magazine)
- May 31, 2003, ... changes and a heat blanket system that allows precise temperature control, co. adds. Imaging Device Features Sleeve Imaging Creo Inc., Burnaby, B.C., Canada; 604/451-2770; 800/685-9462; creo.com The ...
- Model Behavior
- (Archive)
- May 31, 2003, ... temperatures throughout the dryer. Drying programs, which may be of finite difference or of finite element design, can be much smaller, simpler, less expensive, and easier to run than the computational ...