Search

February What's Ne

(Magazine)

January 31, 2008, ... zone has separate controls for heat, humidity, and air flow. All exhaust is ducted to 99.5% destructive thermal oxidizer. Centralized touchscreen operating console offers complete machine controls, including ...

A Smarter Future for Labels

(Tapes)

August 31, 2007, ... offer a means of authenticating products or packs. This list is far from exhaustive. It does not include some of the more traditional clever label solutions such as simple and multiple bar codes, snowflake ...

AIMCAL and SVC Establish Scholarship Fund

(Archive)

July 29, 2007, ... amount of 5% of the endowment fund assets, or a minimum of $2,500. If less than $50,000 but more than $5,000 is collected by January 1, 2009, the principal of the fund will be used directly until exhaustion ...

A Communication from the PLACE Div. of TAPPI

(Magazine)

June 30, 2007, ... exhaust stacks or face the possibility of stiff non-compliance fines. To meet these regulations, many companies installed and have since operated some type of thermal or catalytic oxidizer. While these ...

Baggy Webs: Part II Measuring

(Archive)

April 30, 2007, ... that the web they are sending you is too baggy or baggier that it was before. Here's a fairly exhaustive list of options to measure your baggy web. Tests 1 through 6 measure bagginess off-line with a ...

Keep Moving

(Unprinted Rolls)

February 28, 2007, ... does it with another innovation from Appleton. Previously, according to operators, the two-person task of removing a 500-lb shaft was physically exhausting and time-consuming. “Our muscles would actually ...

the PLACE

(Magazine)

December 31, 2006, ... is key to preempting issues arising with surface treaters. Regular cleaning of bare and covered dielectric ground rolls and cleaning of electrodes and inspection of exhaust airflow and air gaps will ensure ...

What's Ne

(Magazine)

November 30, 2006, ... edge trim removal systems are self-contained units mounted on castors. Incorporating granulator, exhaust systems, and electronic controls, they chop up and reduce voluminous edge trim volume by as much ...

Curing Cuts Co$ts

(Magazine)

October 31, 2006, ... In addition to the energy savings, there is a reduction in the exhaust air and less contamination of the individual components of the UV system. Documentation Confirms Results As soon as the test phase ...

A Communication from the PLACE Div. of TAPPI

(Magazine)

May 30, 2006, ... of scrap although this is unavoidable during product start-ups, transitions, or shut downs. Another possibility is to increase plant capacity, but most converters have probably already exhausted their ...

A Communication from the PLACE Div. of TAPPI

(Magazine)

January 30, 2006, ... cooling too. A housing built around the flame unit may be useful for removing the exhaust gas generated during the flaming. In the flame, activated molecules are produced due to the high temperatures ...

An Exercise in Compliance

(Magazine)

September 29, 2005, ... might be cut away because of damage before using it in a run require tracking by recording their weight. Solvent evaporated during the drying step of a coating that is legally exhausted into the atmosphere ...

New Products

(Magazine)

August 30, 2005, ... exhaust air, which then can be recycled back into the print room. Design does not require any exhaust air ducting from the print room. Workflow Software Tools Updated Esko-Graphics, Vandalia, OH; ...

The Converting Relay Race: Part 1

(Magazine)

July 30, 2005, ... tapes. Just before the active roll is exhausted, a synchronized ballet begins. The new roll is brought up to line speed in close proximity to the exhausting web. Then “Bang, Slash,” the new roll’s leading ...

A King of Shrink Contender

(Flexpack)

March 30, 2005, ... a solid bond and dispenses any need for an exhaust system to eliminate fumes. In addition, the Seammachine allows the user to select various patterns of oscillation. Some theories in the field suggest ...

Nordmeccanica Technology Supports New Dupont/Von Roll Isola USA Laminator Production Line

(Archive)

February 03, 2005, ... that is said to capture any solvent vapors and exhaust them away from the manufacturing area where they are then rendered harmless. For more information on the Duplex Combi Horizontal 1700 laminator, ...

New Product Digest, Part 2

(Magazine)

December 30, 2004, ... stations while delivering higher surface energy levels. Features an air flow and exhaust system that results in an ozone-safe work area; high-efficiency rectangular ceramic electrodes for increased dwell ...

The Word on Winding

(Magazine)

July 30, 2004, ... [provide] higher efficiencies,” he says. When it comes to the purchase of a new winder, Thompson and Bailey agree it pays to be thorough. “The equipment supplier should ask an exhaustive number of questions,” ...

Safety in Converting: Part I

(Magazine)

April 29, 2004, ... covering the product. Heating a hot melt adhesive before its application can release fumes that might be unhealthy for people working in the area. Users must be certain they are exhausting the fumes ...

There's a Duck in My Duct

(Magazine)

December 30, 2003, ... there's a duck in my duct.” Realizing that you had exhausted your supply of duct tape in the assembly of the ducting material, you would place a quantity of duck tape with the adhesive side up inside the ...