Search
- Coating Matters | Plumbing Basics in Coating Technology
- (Coating/Laminating)
- April 30, 2012, ... the world of technology in a simplified model—everything deals with flow. Electrical engineers deal with the flow of electricity through wires; civil engineers deal with the flow of traffic through streets; ...
- GN Thermoformer Saves Waste
- (Green)
- April 17, 2012, ... area of 30 x 21 in. (762 x 533 mm), meeting the demand for medium- and large-volume runs. Reportedly, it offers a reduction in electrical consumption of 35%–50% and uses servo drives for plugging, material ...
- Does Coating Neutralize Static?
- (Kelly on Static)
- April 01, 2012, ... EBEFORE responds to this negative charge on the backside. Coating has no effect on the static charges on the backside. However, most coating solutions have some electrical conductivity. And, the coater ...
- Static Beat | Control Static at the Corona Treater
- (Static-Beat)
- March 12, 2012, ... electrodes causing an electrical discharge between the electrodes and the insulated treater roller that oxidizes the web surface. This electrical discharge also deposits static charge on the web, making ...
- Fume Hoods from Air Science Save Energy
- (News | New Products)
- February 29, 2012, ... are on the clean side of the filter, preventing contamination. Switches and electrical components are totally isolated from the dirty airflow and away from any contamination. Energy-saving units re-circulate ...
- WHQuiz Answer #3 - Dancer Roller Advantages
- (Web Handling)
- February 22, 2012, ... from the output web speed for a limited amount of time. In this regard, a dancer roller can be a mechanical system that forgives electrical and controls problems. A tension load cell roller has almost ...
- Tapeworks Now an Approved Converter for 3M
- (Adhesives)
- February 20, 2012, ... bonding, protecting, electrical shielding, and conducting. Tapeworks adds value to 3M technologies by providing engineering services that convert stock adhesives, liners, both paper and film facestocks, ...
- Grieve Offers Conveyor Oven
- (Coating/Laminating)
- February 12, 2012, The 500-deg-F No. 853 electrically heated belt conveyor oven has insulated walls, variable speeds, safety features, and more ROUND LAKE, IL | Grieve Corp. offers the No. 853 500-deg-F, electrically ...
- Static Beat | Side Matters
- (Static-Beat)
- February 07, 2012, ... nip roller. A non-contacting electrostatic voltmeter (ESVM) measuring VAFTER TINSEL confirms that the bottom side of the BOPP web has no charge. The web exiting this section of the conveyance path is electrically ...
- Static Beat | How To Eliminate Hot Rolls
- (Static-Beat)
- January 16, 2012, ... EEXT is taken on the cylindrical tube just after exiting the extruder: EEXT ~ 0 KV/cm. Molten polymers typically have a small amount of electrical conductivity that dissipates static from the mixing and ...
- Polymer-Based Primer Coatings for Plastic Films Are Laser Printable
- (Coating/Laminating News)
- November 22, 2011, ... rating plates found on electrical motors. Claimed to increase profit margins for labelstock manufacturers and label converters, the coating accepts computer-generated printing, such as dot matrix, laser, ...
- Static Beat: Static Dissipation Testing
- (Static Elimination)
- June 30, 2011, ... static levels low helps prevent dust contamination problems on sensitive products. Static dissipates to ground through electrically conductive paths, and we don't need very much conductivity. In fact, ...
- Drives Motors: From Zero to 800
- (Label/Tape)
- June 30, 2011, ... and a false floor with removable panels. Under this floor are spacious internal wire ways for field wire pulls. All panels conform to IP23 “Touch Safe” physical protection against electrical shocks. The ...
- Crain's Uncovers How Contractors & Trade Associations Squeeze McCormick Place Exhibitor
- (Trends/Management News)
- June 12, 2011, ... better-than-2,000% markup.” • GES and Freeman have lead exhibitors to believe they have no other choice but to use only them for their electrical work. Last year, Focus One (now known as ETS or Exhibitor ...
- Industry Associations
- (Uncategorized)
- June 01, 2011, ... Assn. of Electrical and Medical Imaging Equipment Mfrs. Rosslyn, VA; 703-841-3200; www.nema.org North American Security Products Organization (NASPO) Washington, DC; 202-608-1322; www.naspo.info NPTA ...
- Static Beat: How To Measure Resistivity
- (Static Elimination)
- April 30, 2011, ... electrical resistivity. In this test, the applied voltage of 1,000 volts switches polarity every 15 seconds. The steady state current Imeas is about 3E-12 amps. The resistance is ratio Vapplied to Imeas, ...
- Static Beat: Off-Line Charging Measurements
- (Static Elimination)
- March 31, 2011, ... the static charging performance of materials is challenging. While there are standards for measuring the electrical resistivity and static dissipation time of plastic sheets, I am not aware of any standards ...
- AIMCAL Awards: Canisters Blow Away Competition
- (Metallizing)
- March 31, 2011, ... Austin, TX, is named a second finalist in the Material category for its Metalon ICE-020 Copper-Oxide Reduction Electrically Conducting Screen Ink. A built-in reduction agent converts the low-cost copper ...
- AIMCAL Awards: Canisters Blow Away Competition
- (Coating/Laminating)
- March 17, 2011, ... Copper-Oxide Reduction Electrically Conducting Screen Ink. (14). A built-in reduction agent converts the low-cost copper oxide ink into a highly conductive copper thin-film after printing and post-processing ...
- Counting Clicks
- (Magazine)
- February 28, 2011, ... cleaning and reduce downtime. Mechanical drives are included and only require air and electrical connections. Davis-Standard | www.bc-egan.com Water-Based Paper Coating Offers High OGR Aqualene ...