Search
- Converting Industry News
- (Magazine)
- May 30, 2005, ... web coater (shown above) designed to meet the requirements of products such as flexible printed circuit boards with increased line density; flexible integrated circuits for smart cards, RFID tags, and ...
- A Communication from the PLACE Div. of TAPPI
- (Magazine)
- May 30, 2005, ... similar melt flow rate low density polyethylene resins. Increasing the percentage of vinyl acetate seems only to increase the compatibility with polybutene-1. EXECUTIVE SUMMARY Using Thermal Process ...
- Mouse Roars BUY ME!
- (Magazine)
- March 30, 2005, ... to12-micron metallized PET/75-micron low-density polyethylene (LDPE). Flex Industries designed, metallized, and converted the package while also providing the substrate. Metallization vs. Foil Face-Off ...
- A King of Shrink Contender
- (Flexpack)
- March 30, 2005, ... release liner also is unusable and thrown away. "We have our margins we trim off [the shrink film web] for the registration marks, our density bars, and so forth, but we don’t have any matrix to pull ...
- Get Out of the Scroll Business
- (Magazine)
- February 27, 2005, ... Scroll-ville. Density changes in film or coatings. As a coating dries, it may shrink, pulling the web toward the drying side. Freshly made polymer films may shrink subtly in the first few hours after ...
- Evolving Ink Jet Technology
- (Magazine)
- January 30, 2005, ... located near the nozzle. This system soon was termed the "bubble jet" system. The bubble jet printhead proved to be simple and reliable and could be produced at low cost with high nozzle packing density. ...
- E-Clips Top 10
- (Magazine)
- January 30, 2005, ... Compact 26x20-in. die-cutting press is suited for applications using low-density, nonmetallic materials, including plastic, foam, and paper. Available for manual or automatic operation, unit is said to ...
- New Product Digest, Part 1
- (Magazine)
- December 30, 2004, ... Said to find any defect, including missing print, streaks, filled-in characters, ink density variations, misregistration, etc., at tolerance levels that can be specified per area of interest. Defect images ...
- A Communication from the PLACE div. of TAPPI
- (Flexpack)
- December 30, 2004, ... as wonderful in a garden or fragrance environment is an unacceptable taint in bottled drinking water. Alternately, the unpleasant odor of butyric acid perceived as a major malodor contributor in high-density ...
- Rotogravure an Evolving Process
- (Magazine)
- October 30, 2004, ... Solvent-based rotogravure inks provide the widest choice of binder, resolubility, color density, rapid drying rate, and excellent substrate wetting properties for high quality graphics. Their major downside ...
- Extrusion Dies
- (Magazine)
- October 30, 2004, ... is new business in high-barrier products, which include stand-up food pouches and medical packaging. Besides the roughly $0.50/lb cost of commodity resins such as low-density polyethylene (LDPE), the dominant ...
- PFFC Worldwide Special Report on Release Liners, part 2
- (Archive)
- October 30, 2004, ... and release liner. We selected a well-cured release system and chose an acrylic adhesive in which the crosslink density could be controlled. For consistency, we opted for full cure. Test panel preparation ...
- Products, Part 1
- (Magazine)
- September 29, 2004, ... NY, USA; 716/894-5613; ttarp.com Compact 26×20-in. die-cutting press is suited for applications using low-density, nonmetallic materials, including plastic, foam, and paper. Available for manual or automatic ...
- Discoloration Resistant Polyolefin Films
- (Magazine)
- September 29, 2004, ... and maintenance of color are critical. The most prevalent use has been in fiber applications such as polypropylene or high density polyethylene where any type of discoloration is not acceptable. Recently, ...
- Printing: Italian Style
- (Magazine)
- August 30, 2004, ... the Genius Digital for defect detection, which Cattaneo says “works very well.” He cites low dot density (5%) process color areas, which he says are difficult to print cleanly on any flexo press. Genius ...
- Release Liners: Challenges Ahead
- (Magazine)
- August 30, 2004, ... the paper release liner industry. He discussed materials — polyesters, low- and high-density polyethylenes, polypropylenes, and polystyrenes — and evaluated their advantages and disadvantages. He concluded ...
- A Communication from the PLACE Div. of TAPPI
- (Magazine)
- July 30, 2004, ... Extrusion Coating Performance of Low-Density Polyethylene (LDPE)." The scope of the method notes that it describes how oscillatory measurements are useful to characterize LDPE. The storage modulus and ...
- Converting Industry News
- (Magazine)
- July 30, 2004, ... delivering high-performance surface functionalization with unique high-density atmospheric plasma treatment. The company says the upgrade extends its capabilities to conduct trials for customers. ...
- The Word on Winding
- (Magazine)
- July 30, 2004, ... at Faustel, Germantown, WI (faustel.com), credits winders today as having improved winding that consistently makes excellent, shippable, quality rolls with respect to roll density and hardness, improved ...
- Battenfeld Gloucester Says MDO Provides Enhancements to PE; OEM Spotlights K Show Offerings
- (Archive)
- July 05, 2004, ... the MDO unit, initially, is being used to orient (i.e., pre-stretch) coextruded linear low-density or metallocene polyethylene stretch film. "[We're] evaluating different applications for the process," ...
