Cores

Reporter Clips

(Magazine)

October 31, 2001, News from: Appleton, Dunsirn (Avery Dennison), FINAT, Gallus, MACtac, MetroMark, Patco Corp., Ritrama, SE Label Image, Seal-It, and Sonoco, plus narrow web People & Places. Narrow Web Converting Industry ...

Materials

(Magazine)

September 30, 2001, New from: Adhesives Research, Akzo Nobel, Davies Industrial Supplies, FLEXcon Co., Tesa Tape, and UCB Films. Tape Useful for a Variety of Splicing Applications Adhesives Research, Glen Rock, PA; 717/235-7979; ...

Slitting Adhesive-Coated, Low-Strength Films

(Magazine)

September 30, 2001, ... with pneumatic conveying of the trim away from the slitter, the trim may be wound on waste roll cores on another mandrel or wound on separate, even-wind trim winders at the machine sides. But good rewind ...

Slitter Savvy: Visual Roll Defects & Remedies

(Magazine)

July 31, 2001, ... in appearance between the paper near the core and the remainder of the roll. Remedies: Tighten web before fastening to core Start with web straight on cores Use good quality, properly stored cores ...

Trends in Flexible Packaging Markets: Two Different Views

(Magazine)

May 31, 2001, ... projection of the top five flex-pack markets in the next five years (2000-2005). I must differ with the association. Over the course of a year, I visit scores of raw material suppliers, flex-pack converters, ...

What's New Narrow We

(Magazine)

May 31, 2001, ...  Anilox Cores Lighten the Load Harper Corp. of America, Charlotte, NC; 704/588-3371; harperimage.com Two lightweight anilox cores for narrow web flexographers are manufactured from the same high-grade ...

Products

(Magazine)

April 30, 2001, ... Cutter Is Programmable Eberle, S.A., Reichstett, France; +33 388336025 The Delta 200 programmable in-line cutter can cut cores with diameters from 20 — 200 mm and thicknesses to 45 mm. Cutter has a maximum ...

Products at CMM

(Magazine)

March 31, 2001, ... job parameters, Hi-Lo alarm outputs, data output for SPC or printer, and other features. Visit Booth 6141 at CMM International. Cut Cores Accurately and Simply Elite Converting Machinery, Piscataway, ...

Leave Your Limits BehindDrop into CMM with Us

(Magazine)

February 28, 2001, ...  [award winner] for his excellence in flexographic printing underscores the variety of technologies represented at CMM International. Our previous honorees have included flexible package printing, boxmaking ...

A Glossary of Descriptive TermsSixth Installment

(Magazine)

February 28, 2001, ... horizontal sliding (idler side) rotary chuck that will interface with the mandrel ends on cores that are dressed with expandable mandrels or that will interface directly with the roll core ends. The chuck ...

Products

(Magazine)

February 28, 2001, ... of shafts during core removal; cores of differing widths wound on the same shaft at the same web tensions; patented core alignment supplied by pneumatically raised and lowered ledges containing adjustable ...

Core Cutter a Boon to Independent Tube Company

(Magazine)

February 28, 2001, ... its customers — who encompass a wide variety of industrial and commercial applications — the fastest speeds and highest quality possible. Erdie Paper Tubes converts a wide range of cores, in inner diameters ...

Controlling Your Web from Beginning to End, Part II

(Magazine)

December 31, 2000, ... rewound roll densities Starred rolls Crushed cores Edge thickening, coned edges, and roll dishing Stepped wind on roll face Fuzzy roll sides Shiners or flashers Offset cores Productivity Web ...

What's New in Narrow We

(Magazine)

December 30, 2000, ... and rewound in one easy operation, co. says. Slitting station includes two blades and every-thing needed except labels and rewind label cores. Included is co.'s Cat-2-Chuck rewinder with Quick-Chuck quick-loading ...

Products

(Magazine)

November 30, 2000, ... finishing more rolls with varying widths. It can exert equal torque along its length at any time, so it can hold a number of cores with varying widths in one operation, mfr. says, adding that this allows ...

What's New in Narrow We

(Magazine)

November 30, 2000, ... include an adjustable spool that accommodates cores of 1-4 in.; a reversible motor for unwinding or rewinding with the flip of a switch; and variable take-up speeds to 12 in./sec. Accommodates paper widths ...

Polyester Film Sourcing: Tips to Improve the Bottom Line

(Magazine)

November 30, 2000, ... such as 1 and 3 in., cannot hold weights and roll lengths that are conducive to efficient production processing. While 6-in. cores are most common, 10-in. cores holding jumbo rolls are gaining in popularity ...

Converting Industry News

(Magazine)

November 29, 2000, ... stop using laminated board, in line with the company's environmental program. Used gable-top cartons are recycled in Finland to make cores for the paper industry. P&G Develops New Package to Run on ...

Converting Industry News

(Magazine)

September 30, 2000, ... high quality coating capabilities. Webs up to 740 mm wide may be wound up to 500-mm dia on 3- or 6-in. cores. Drying ovens are capable of temperatures to150 deg C. For more information contact Yasui Seiki ...

More New Products for the Converting Industry

(Magazine)

August 31, 2000, ... mm and is supplied in diameters of 70, 76, 120, and 150-152 mm (combined). It can be used with cardboard, plastic, or steel cores. Available as optional equipment on new machines or can be retrofitted ...

NOVA and Union Carbide to build ethylene plant

(Magazine)

October 31, 1996, ... in diameter. Each has its own top-riding roll to ensure optimum rewind quality. A turret rewind section is designed to reduce downtime to a minimum as new cores are loaded onto one shaft in each twin ...

MSC Specialty Films reaches success down to the core

(Magazine)

May 31, 1996, ... coating/laminating areas operate in a cleanroom environment. Cost-Competitive, Custom Cores As a unique company, MSC was looking for a core supplier that would respond to its individual needs. This ...

New hot stamper does more for short runs

(Magazine)

February 29, 1996, ...  Jack Estes, it was decided the Franklin could, indeed, handle this part of the operation as well. For this job, in one pass the Franklin stamps four colors, applies a universal product code, die-score ...

Deciphering the complexities of the core/shaft/unwind relationship.

(Magazine)

January 31, 1996, ... application, there are many factors to consider. What are these considerations, and how do you get past them to start rolling out quality product? In examining the relationship among cores, shafts, ...

Core selection - the difference between success and failure.

(Magazine)

January 31, 1996, ... approach has saved customers thousands of dollars in increased productivity and reduced waste. "New thinking about the role of cores in total systems performance has largely displaced the traditional ...

Don't forget your unwind

(Magazine)

January 31, 1996, ... core shaft and core sizes to accommodate the weight of the roll. Most films and papers are produced on 3- and 6-in. cores, whereas board is produced on 8-, 10-, and 12-in. cores. This is reasonably easy ...

Winders/Unwinders: Gettting Better Every Day

(Magazine)

August 31, 1995, ... defects, including corrugations, delamination, crepe wrinkles, stretching, wrinkling, blocking, cigars, bursts, out-of-round or eccentric cores, and the dreaded web break. Understanding this technology ...

Growing popularity of PET drives shortage to crisis level

(Magazine)

August 31, 1995, ... a sound, successful infrastructure was established. These two factors contributed to PET's reputation as the environmental resin of choice, propelling scores of packagers to abandon perfectly acceptable ...

Winding system suited for long lengths

(Magazine)

February 28, 1995, The winding system is designed for slitting and spooling exceptionally long lengths of tension-sensitive medical laminates onto a single core. It features The winding system is designed for slitting and ...

Shredders provide recycling advantages

(Magazine)

February 28, 1995, The company's core shredders are designed to handle cores and butt rolls up to 8-in. in diameter at a speed of 40 fpm and shred up to 8 tons of cores/hr. The company's core shredders are designed to handle ...