Search

Drives Motors: From Zero to 800

(Label/Tape)

June 30, 2011, ... also fabricated a new dancer assembly for the rewind section of the coating line, added lay-on rolls, and modified the knife on the splicing assembly. A new five-zone dryer, entrance vacuum roll, and exit ...

Roll Finishing-Cut & Sand

(Winding Unwinding Rewinding)

April 30, 2011, ... the excess paper using a vacuum. The IRB 6620 is a flexible and agile six-axis robot with a large working envelope. It features a compact design, has a reach of 2.2 m, and can handle payloads up to ...

AIMCAL Awards: Canisters Blow Away Competition

(Metallizing)

March 31, 2011, ...  *The Vacuum Metallized or Coated Product of the Year Award honors the late Peter Rigney, former publisher of PFFC, who died in 1997 and was a long-time champion of AIMCAL and the competition.  ...

AIMCAL Awards: Canisters Blow Away Competition

(Coating/Laminating)

March 17, 2011, Winning entries are recognized for excellence in AIMCAL's annual Vacuum Metallized or Coated Product, Sustainability, and Technology of the Year Competitions During the Assn. of Intl. Metallizers, Coaters ...

Coating Matters: Don't Blame Chatter on Coating Hea

(Coating/Laminating)

January 31, 2011, ... a piece of stabilizing equipment. One option is a vacuum chamber at the site where the fluid interacts with the substrate. A vacuum box can stabilize the substrate/fluid interface and reduce variation. ...

Pilot Coaters: Small Volume, Big Advances

(Coating/Laminating)

September 30, 2010, Until recently, development of laboratory and pilot coater technology has been relatively stagnant. The many improvements increased coating speeds, improved Until recently, development of laboratory ...

A time to celebrate

(Special Reports)

April 30, 2010, ... the industry. Each blog features an expert in that area. www.WebCoatingBlog.com — Dr. Ed Cohen www.VacuumCoatingBlog.com — Dr. Charles Bishop www.WebHandlingBlog.com — Dr. David Roisum www.SpecialtyWebCoatingBlog.com ...

Web Lines: Your Guide to Web Guiding | Part 1

(Web Guiding)

February 28, 2010, ... and exits of most oven, curing, dip tank, or vacuum processes require the web to pass through a slot designed to minimize the leakage of gas, heat, or radiation. Slots may be either generous (±1 in. or ...

Get a Grip on Your Web

(Tension)

October 31, 2009, ... zones in a web line, reduce web slippage over a roll, or pull the web at increased speeds and with greater operator safety, vacuum rollers can solve these web handling needs with unique traits not found ...

New Roles for Converters

(Archive)

September 30, 2009, ...  The second-generation products had reduced production costs and improved performance. This process used vacuum deposition to deposit a variety of materials, i.e., cadmium telluride and amorphous silicon, ...

WHAT'S NEW PRODUCT

(New Products)

September 30, 2009, ... Web Inside a Vacuum The HFV Series linear actuator is said to provide a simplified solution for guiding the web inside a vacuum chamber. Designed to retrofit easily with customer's existing vacuum chamber, ...

Contamination Combat

(Web Cleaning)

May 31, 2009, ... are available to tackle these problems? There are various methods employed, ranging from wiping plates with a cloth to blower, brush, and vacuum systems to remove dust and debris from the surface of the ...

WHAT'S NEW PRODUCTS: April 200

(New Products)

March 31, 2009, ... fpm, and is ideal for a variety of bag applications. ▶CMD | 800-626-0210 | www.cmd-corp.com Circle 408 or visit www.freeproductinfo.net/pff Vacuum Press in Small Sizes Company is offering tabletop ...

What's New Products: March 200

(Magazine)

February 28, 2009, ... high-power vacuum dust collection system designed with a vacuum control plate that gives complete coverage of the material surface. Flexible ducting carries the contaminants to the collection system where ...

Web Exclusive: Slitting Film

(Archive)

November 11, 2008, ... foil will be increasingly substituted by vacuum-metallized plastic films with, for example, retortable pouches and cans made out of plastic and foil as an alternative to metal cans. Stretch films will ...

Web Coating: Process Characterization

(Coating/Laminating)

October 31, 2008, ... a slot die coater, these are the specific variables to be characterized: Gap between slide lip and coating roll; Vacuum box vacuum level and clearance; Flow rate to slot die; Solution and applicator ...

August 2008 PFFC What's New Products: Part tw

(New Products)

July 31, 2008, ... EasyClamp III vacuum drum sleeve, a pneumatic clamping mechanism that further accelerates plate loading. EskoArtwork | 800-743-7131 | www.eskoartwork.com PFFC-ASAP 413 Match Colors Throughout The ...

What's New Product

(New Products)

June 30, 2008, ... a very fast exchange of print sleeves without additional handling equipment. Options include the EasyClamp III vacuum drum sleeve, a pneumatic clamping mechanism that accelerates plate loading. EskoArtwork ...

What's New Product

(New Products)

May 31, 2008, ... PC or other computer workstation. Dickson Co. | 800-757-3747 | www.dicksondata.com PFFC-ASAP 412 Remove Dust On Sheeter Vacuum system for company's sheeter removes dust at the slitters, ensuring ...

Drupa New Product Digest

(Magazine)

April 30, 2008, ... treating, vacuum web cleaner, three lamination units with automated hydraulic press system for high laminating pressure, and more. Visit Hall 13, Stand B93. Sung An Machinery | 315-635-8072 | www.sungan.net ...