Search
- Converting Industry News
- (Magazine)
- September 30, 2007, ... consulting services to industries in which temperature is a critical factor in the manufacturing process and where selection of the right instrument is crucial to achieving precise temperature measurements. ...
- WHAT'S NE
- (Magazine)
- August 31, 2007, ... Designed for use in extrusion applications, products are available for burst pressures from 1,500–15,000 psi and are said to have an accuracy of ±5%. Melt temperatures to 750 deg F are standard. ...
- A Smarter Future for Labels
- (Tapes)
- August 31, 2007, ... longer, absorb odors, stop moisture deterioration, offer proof of process control, provide evidence of compliance, or even monitor and track changes in temperature over a period of time. Think these ...
- Baggy Webs: Part III-Causes
- (Magazine)
- June 30, 2007, ... change in webs are stress (force over area), temperature, and moisture. In tensile testing, a web usually reacts to stress in one of two ways. It may stretch elastically, fully recovering when the stress ...
- Working Undercover
- (Magazine)
- June 30, 2007, ... today take the product security platform one step further. Self-adhesive labels on fresh food packaging can feature a time/temperature indicator, warning retailers and shoppers if the product has exceeded ...
- Narrow Web New Products
- (Magazine)
- June 30, 2007, ... curing shrink sleeves and other temperature-sensitive materials. PFFC-ASAP 401 Get the No-Label Look FLEXcon, Spencer, MA; 508/885-8370; flexcon.com Company announces optiFLEX PP 200 H Clear TC-332 ...
- A Developing Story
- (Magazine)
- May 31, 2007, ... a variety of films including polyesters, polystyrenes, and polypropylenes. It operates 30-in. and 60-in. custom-built, water-based tension- and temperature-controlled coaters, the largest equipped with ...
- What's Ne
- (Magazine)
- May 31, 2007, ... section with double cart; and a turret winding station for 1,200-mm-dia reels. Lamination/coating unit has a chill roll with precise temperature control and a preheating unit with diathermic oil. PFFC-ASAP ...
- Cause & Defect
- (Magazine)
- April 30, 2007, ... in coating weight and mottle. Low-viscosity coating solution from low-percent solids or high temperature will make the coating easier to distort. For this defect, characterization data from the process ...
- New Product Digest
- (Magazine)
- April 30, 2007, ... temperature offset capability to ±1 deg C for temperature adjustment. Visit Booth 801. PFFC-ASAP 414 Light Boxes Aid Inspection New Era Converting Machinery, Paterson, NJ; 201/670-4848; www.neweraconverting.com ...
- A Scrappy Competitor
- (Magazine)
- March 31, 2007, ... then is fed directly to the extruder screw. Compression and melting are said to occur gradually, at a precisely controlled temperature, adding minimal “heat history” to the reclaim. “With technically ...
- the PLACE
- (Magazine)
- February 28, 2007, ... layer distribution even in cases with a large difference in melt temperature. Adjustable co-extrusion feedblocks are available to compensate for changes in layer ratio, to change the number of layers, ...
- Narrow Web What's Ne
- (Magazine)
- February 28, 2007, ... Polymers, Holyoke, MA; 800/628-9007; dipoly.com NT-5511-2SW and 5512-2SW self-wound tapes are said to offer quick and easy splicing of siliconized webs. Polyester film backing is coated with high-temperature ...
- Reader's Choic
- (Magazine)
- February 28, 2007, ... finish to produce a textured or opaque film. Proprietary heat transfer software is used to design each chill roll to operate with exacting temperature control of ±1 deg F, company reports. Webex—PFFC-ASAP ...
- What's Ne
- (Magazine)
- February 28, 2007, ... Sun Chemical Corp., Northlake, IL; 708/562-0550; sunchemical.com SunStrato Duratort lamination inks are specifically formulated to withstand extended exposure to the high temperatures of the retort process. ...
- Converting Industry News
- (Magazine)
- February 28, 2007, ... says F&K. Inks required temperature control to ensure optimum processing under all production conditions while inking and wash-up cycles of the Autoclean system were adapted to UniQure ink properties. ...
- Color 101: Part II
- (Magazine)
- January 31, 2007, ... using all specified inks and substrates and is signed off by the consumer product company. For future use, this target should be stored protectively, away from light and in stable temperature and humidity. ...
- WHAT'S NE
- (Magazine)
- January 31, 2007, ... Two-sided coater is designed to apply an overall coat of temperature-controlled fluid to two sides of the web simultaneously. Enclosed reverse-angle doctor blade systems are used for precise fluid application ...
- the PLACE
- (Magazine)
- January 31, 2007, ... an earlier study involving blending an additive into LDPE to enhance its adhesion to foil. That study involved a statistically designed experiment that varied the coating temperature at the die exit, coating ...
- Brand Protection with Micro-Dots
- (Magazine)
- December 31, 2006, ... counterfeiting security, such as DNA or magnetic tracers. The problem with such special inks or ink additives is the related logistics and manufacturing procedures, such as press cleaning, temperature ...