Search

IQMS Device Aids Shop Floor Personnel

(News | New Products)

April 22, 2012, ... for production reporting, allows for operation clocking in/out, and displays job set-up data. Station is able to connect to a variety of Ethernet, USB, or RS232 supported hardware and peripherals. Features ...

Release Liner | Industry Conference Covers Market Data & Trends

(Label/Tape)

April 11, 2012, ... label matrix and set-up waste are key areas where the association is concerned to identify and promote secondary materials/recycling solutions. He said that establishing an active industry network and ...

Slitting/Rewinding | Trim Loss as Low as 3%

(Slit)

March 14, 2012, ... us entirely responsible, from set-up to shipping.” At times, the cost of slitting is very low when compared to the customer’s raw material cost. Etchells cited an extreme example where the narrow width ...

Maxson Sheeter Suited for Digital Press Sizes

(News | New Products)

February 24, 2012, ... specifically designed for the digital sheet-fed printing presses. The sheeter, which can accept webs to 65 in. wide webs, can convert and stack sheets to 40 in. long. Equipped with a quick-set-up slitting ...

Slitting/Rewinding | Arkwright Improves Output with Shaft Upgrade

(Slit)

January 17, 2012, ... machinery.” Reduced Set-Up Times & Faster Operating Speeds After consulting with Phil Pretto, Goldenrod’s eastern sales manager, Girardi decided to retrofit some of Arkwright’s existing slitter/rewinders ...

EFI Jetrion 4900 UV Inkjet Digital Label Press Offers In-Line Laser Finishing

(News | New Products)

November 21, 2011, ... Jetrion 4900 UV inkjet digital label press from EFI offers high quality with in-line laser finishing that's reportedly suited for more efficient and profitable short-runs. Set-up time is said eliminated ...

Menasha Packaging Announces $10M Pennsylvania Expansion

(Carton Box)

March 09, 2011, ... waste. The third phase, slated for completion in early 2012, involves installation of a state-of-the-art Isowa four-color flexo folder gluer. The new equipment is said to have shorter set-up times and ...

Flexotechnica Has 'Significant' Q4 Sales Increas

(Flexography)

December 15, 2010, ... set-up waste when starting a new print job. This new system was shown to numerous visitors at Flexotecnica’s factory in Tavazzano, Italy, concurrently with the “K” Exhibition in Dusseldorf, Germany, and ...

Flexotecnica Open House Demos New Press Model

(Flexography)

October 06, 2010, ... features related to press set-up and make-ready, which are the outcome of extensive research related to setup waste and time reduction. With the frequent daily flight connections from Düsseldorf to ...

Press Meets Demands for Short Runs

(Flexography)

September 12, 2010, ... steps, drastically streamlining productivity. Job setup is quick and easy, resulting in the fastest and most consistent makeready times in the industry, according to the company.  Set-up of a four-color ...

Fischer & Krecke Wins FTA Technical Innovation Award 2010

(News | New Products)

May 02, 2010, ... systems that perform set-up in the press through a manual or automatic optical system, smartGPS does the job offline at the plate mounting stage while adding almost no additional time to that process. ...

FTA Honors Two Companies in Environmental Excellence Award Competition

(News | New Products)

April 04, 2010, ... set-up times by more than half, and significantly reduce water consumption. This further amounted to an increased employee understanding and participation with conservation processes, according to the ...

Fieldmeter or Voltmeter?

(Static-Beat)

December 23, 2009, ... charge. Voltmeter measurements are somewhat more tedious to set-up and make because readings should be taken on the surface of the web where it is wrapped around a grounded metal roller. The voltmeter ...

Mark Andy Debuts Performance Series

(News | New Products)

November 12, 2009, ... capabilities during several demonstrations held daily throughout the show. Demonstrations were targeted to prove key converter requirements to which the press was designed, including faster set-ups ...

AIMCAL Announces Matteucci Technical Excellence Awards

(News | New Products)

October 21, 2009, ... Gary Samuels of Dunmore Corp. for his presentation on “Production Improvements to Increase Profitability with an Emphasis on Set-Up Reduction/5s, Process.” Judges noted how he demonstrated the applicability ...

'Ideas First' for Nuova GIDUE at LabelExpo 200

(News | New Products)

September 16, 2009, ... Intelligent Register for the short set-up times and reduced waste. A new Pro-Ink inking system will be unveiled for high speed performances (up to 200 mpm) with UV inks. The Full Combat can print a wide ...

Pack Expo Co-Locates with CPP and Other Events for Value

(News | New Products)

August 30, 2009, ... Ltd.’s (Booth # C-3105) HIPAK boxmaker provides the flexibility needed to produce short to medium runs of 'Just-In-Time' corrugated boxes. With a set-up time of only a few seconds, boxes of virtually any ...

AVT & GMI Plan Strong Presence at Labelexpo Europe

(News | New Products)

August 23, 2009, ... makes set-up and inspection of barcodes and variable data items fast and intuitive. The system also supports the new E-Pedigree FDA regulations to “track and trace” pharmaceuticals from manufacturer ...

Labelexpo Europe Preview of Exhibits

(News | New Products)

August 19, 2009, ... full bleed for professional quality, 4800 x 1200 dpi and simple set-up and operation from roll or fanfold label stock. The VIPColor 485e is designed for the production of labels with variable color, images, ...

Graphic Technologies Installs Stamping & Folder/Gluer Machinery

(News Eclips)

March 03, 2009, ... flute corrugated board and a wide range of products, including straight line and crash-lock cartons, 4 and 6 corner cartons, pocket folders, envelopes and more. Quick setup is enhanced by computer set-up ...