Search

New P Show, Intl. Trade Fair for Process-Oriented Packaging Production, Has Premier Potential, Say Organizers

(Archive)

April 28, 2004, ...  International Orientation According to Messe Stuttgart, P will cover the entire packaging production process. "This means the focal points of the trade fair will be processes for the production of packaging ...

Film Wettability Not So Simple

(Magazine)

March 31, 2004, ... always is more problematic, as rapid migration and orientation will lower the treatment level with time. In-line treatment is better suited for improved adhesion and film wettability. On the down side, ...

A Secure Alternative

(Magazine)

March 30, 2004, ...  A Variety of Images Micro-optic films present visually compelling images that can be seen over a wide field of view, in any orientation, under virtually any lighting. These films are overt security ...

Producing Coextruded High Barrier Heat-Shrinkable Packaging Films

(The Place)

September 30, 2003, ... be adversely affected. The thick quenched tube-typical thickness of approximately 0.4-1.0 mm at a temperature of approximately 30°C has little or no orientation at this stage. It is then fed into a ...

What Can Conductive Organic Polymers Do?

(Materials)

August 31, 2003, ... “lined up” in a given orientation by orienting the monomers through the use of liquid crystals or similar “template materials.” Polymerization of the monomers produces polymers that are highly ordered ...

Products

(Magazine)

August 31, 2003, ... of surfaces and can be positioned to print vertically, horizontally, or any angle in between. Printing orientation itself can go in any direction. Modular design allows the 1.5-in. units to be stitched ...

Coex for Success

(Magazine)

June 29, 2003, ... and predictive control systems. Timm feels film orientation is coming. “Although simple in concept, making machine direction or cross-machine direction stretching viable requires considerable technological ...

Can't Touch This (Web): Part

(Magazine)

May 31, 2003, ... We can increase the total wrap allotment by changing the start and end orientations. In the lazy C web line, we can increase the total one-sided wrap by changing how we enter or exit the winders. For more ...

Fit for Use

(Materials)

April 30, 2003, ... to vary which curve the polymer is on based upon the level of molecular orientation in the film (Figure 2). Thus cast films with low orientation will appear to be softer and weaker than the same polymer ...

AIMCAL Winners Pulsate with Panache

(Corrugated)

March 31, 2003, ... and oriented in the transverse direction. Applying the coating between the orientation steps allows it to be linked mechanically to the surface and ensures superior adhesion. The coating, after drying ...

Products

(Magazine)

August 31, 2002, ... and surface energy; liquid permeation and paper absorption; paper surface marking impressions; felt fiber indentations; missing raster dots; fiber layer orientation; and small-scale pinhole ID. Products ...

DOVIDs: Functional Beauty

(Magazine)

July 31, 2002, ... reproduced in close contact with the photo-resist plate, and by changing the orientation of the two laser beams, it is possible to produce a two-dimensional image containing multiple colors and kinematic ...

Coating and Laminating Special Report

(Archive)

February 28, 2002, ... process. Cast PP film (CPP) is produced by casting the extrudate onto a chill roll. In this case, orientation of the film is zero in the TD and minimal in the MD.   BOPP films are used in labeling applications, ...

Automated Sortation System Boosts Customer Satisfaction

(Magazine)

November 30, 2001, ... system,” Anderson explains. The XLT200 is capable of reading UPC bar codes in any orientation; however, only picket fence and ladder orientations are presented in the Smurfit-Stone system. The XLT200 overcomes ...

Slitting Adhesive-Coated, Low-Strength Films

(Magazine)

September 30, 2001, ... side of each blade must face the trim; therefore this method requires the operator to orient the blades properly during blade change-out. Orientation is easy to remember, because the bevel side always ...

The Trick Is in the Treat(ing)... MW Plastics' New Lab Can Help Solve Tricky Treating Issues

(News | New Products)

August 13, 2001, ... of the supplier's GX generator. Marshall and Williams is a manufacturer of orientation machinery for biaxially oriented polystyrene, PVC, polypropylene, and other oriented materials. For more information ...

Russian Label Show Exhibits Lively Growth

(Magazine)

June 30, 2001, ... markets for packaging in the world. Since its re-orientation toward a market-based economy, the country has experienced dynamic growth in package printing, with labels — and self-adhesive labels in particular ...

Reporter Clips

(Magazine)

June 30, 2001, ... presentation of the graphics, the billboard effect of the 360-degree graphic orientation, and the ability of the label to shrink to the contours of the bottle ensure a unique way to differentiate the product ...

Over-Tensioned Webs and What to Do about Them

(Magazine)

May 31, 2001, ... web caliper near the web edges. If the wrinkle diagonal leads in orientation — i.e., the wrinkle angles toward the wound wraps as the leading edge of the wrinkle is lifted off the roll — then the web edge ...

Products

(Magazine)

May 31, 2001, ... is a casting with provisions for control gear and bearing housing, said to result in a smaller, lighter unit for ease of mounting onto other equipment at any orientation as long as the infeed web is parallel ...