Search

DFE Transducer Suited for Heavy Duty

(Web Handling News)

April 27, 2016, The F3H from Dover Flexo Electronics is said to measure high tension accurately using live shaft idler rolls ROCHESTER, NH | Dover Flexo Electronics (DFE) announces the model F3H heavy-duty flat-style ...

Coast Controls Roll Stand Has Montalvo Tension Controls

(News | New Products)

April 06, 2016, ... steel tube construction Primed and Painted to the customer’s specification Auto-Centering for new roll loading Precision Aluminum idlers engineered for each application Completely assembled, calibrated, ...

Static Beat | Dissipators Work Where Only 1 Side Has Static

(Static-Beat)

September 20, 2015, ... SBOUT in Figure 1 neutralizes static charges deposited on the bottom surface of the web by the idler rollers inside the dryer/oven. We know that these static charges must be on the bottom surface of the ...

Web Lines | Air Bubbles in Your Laminate

(Web Handling)

August 31, 2015, Here are 7 solutions when laminate bubbles or uncoated area creates delamination at idler rollers Here are 7 solutions when laminate bubbles or uncoated area creates delamination at idler rollers. ...

Static Beat | Control Static on Insulating Webs in Dryers

(Static-Beat)

July 22, 2015, ... fires. With good static control upstream, a charge-free web enters the dryer in Figure 1. However, when the web touches idler rollers in the dryer, the back, uncoated web surface becomes charged. After ...

Solvent-Free Lamination | Nordmeccanica Opens/Demos at New Permanent NA Home

(Coating/Laminating)

June 10, 2015, ... be treated properly on-line. Also, foil is heavier than film but much less extensible, so perfect web tension is an absolute requirement, meaning driven unwinds, smooth, aligned, free-turning idlers, and ...

Nordmeccanica Demonstrates Solvent-Free Adhesive Laminating

(Tom’s Poly Ploys)

June 07, 2015, ... motor size and control; idler roll design, balance and fabrication; 4-roll laminator design and speed control; line tension control; and speed ramp-up protocol to produce a new structure heretofore unmade ...

Maxcess Completes Investment in Centers of Excellence

(News | New Products)

May 12, 2015, ... Heat Transfer, Vacuum, Spreader/Bowed, and Idler Rolls in quantities said to be unrivaled in the industry. “With this Centers of Excellence initiative in Chicopee and Neenah, we stand prepared to leverage ...

Web Lines | Unwritten Rules, Now Written

(Technical Reports)

April 27, 2015, ... will run at narrower web width, especially obvious in low modulus and thin webs. Moderately tensioned webs will run at a wider width, have less traction to pull out bagginess, turn idler rollers, and ...

AZCO Sheeter Has Automated Stacking System

(News | New Products)

March 14, 2015, ... idler roller to maintain web tension and alignment. All rollers are urethane coated for uniform grip of the material. An end-of-roll sensor alerts operator when the roll is out of material. The aluminum ...

Jemmco Announces Conductive Rubber Sleeve

(News | New Products)

January 14, 2015, ... resistance, and anti-static features. The sleeve is called ideal for applications processing delicate webs in need of reducing static buildup, including but not limited to bowed rolls, idler roll covers, ...

Allstein Announces New Paperboard Press

(News | New Products)

January 06, 2015, ... press with larger idler rolls that is currently available from suppliers, rather it is a workhorse press designed to specifically handle the higher tensions and greater caliper variations typical in paperboard ...

Show Preview | ICE USA 2015 Returns to Orlando with Added Features

(Trends/Management)

January 05, 2015, ... chucks for quick roll changes. A motorized unwind with a dancer assembly provides constant web tension as the material goes over the ball-bearing idler rollers. Precision ground urethane rollers are turned ...

Componex Announces Thermal Spray Coatings

(News | New Products)

August 23, 2014, WINtrac thermal spray coatings for idler rolls are said to provide increased durability and traction   EDGERTON, WI | Componex offers WINtrac thermal spray coating for idler rolls. Coating is engineered ...

Webex To Manufacture Carbon Fiber Bridge Mandrels

(News | New Products)

May 06, 2014, In addition to in-house manufacturing, company will refurbish and repair mandrels for hydraulic mount flexo presses   CHICOPEE, MA | Webex, a supplier of cooling rolls and mandrels for the web handling ...

Web Lines | Why Is Winding Optimization Difficult?

(Web Handling)

April 21, 2014, ... what an ugly roller it is. Before winding, think of the core as this last roller. Compared to your idler rollers, your core or winding roll are likely out of spec in terms of diameter uniformity, alignment, ...

Gloucester Expands Rebuilding Capacity

(Bag Pouch)

April 06, 2014, ... diagnosis, troubleshooting, and recipe storage; • refurbished shuttle and idler rollers; • replacements for stub shafts and bearings; • replacement of guards’ outboard of side frames on the operator’s ...

Do You Need a Roller That Is Chillin' and Groovy?

(Web Handling)

March 30, 2014, ... nipping? Sure. Groove the roller. That’s what I’d recommend for any idler roller. Is there any reason to hesitate in grooving a nipped roller? I'm mostly a web handling guy, but I know something about heat ...

Maxcess and Webex Will Merge

(News | New Products)

February 12, 2014, ...  For Webex customers, the precision idler, bowed, heat transfer, and vacuum roll products with which they are familiar will now be supported by one of the largest local sales and service teams in the ...

Static Beat | Static Dissipator Neutralization Efficiency

(Static-Beat)

January 02, 2014, ... objects, which are the metal idler rollers. So, install your static dissipator midway between idlers away from machine frames. Notice that installing your static dissipator close to the web (making the ...