Search

Color 101: Part II

(Magazine)

January 31, 2007, ... using all specified inks and substrates and is signed off by the consumer product company. For future use, this target should be stored protectively, away from light and in stable temperature and humidity. ...

Stretching Boundaries

(Flexpack)

May 30, 2006, ... reference signal to eliminate guide point drift due to changes in temperature, humidity, dust, dirt, ink overspray, web flutter, etc. As environmental conditions change, the reference beam, or compensation ...

Mastering RFID, Part 2

(Archive)

September 29, 2005, ...  Relative humidity also influences the level of electrostatic charges. When humidity is low, higher static charges are generated. Humidity levels of more than 50% limit static buildup since surface moisture ...

A Communication from the PLACE Div. of TAPPI

(Flexpack)

June 29, 2005, ... water and humidity resistance. Their advantages nevertheless far outweigh these concerns. As the paper shows, the chemistries available have use for a wide range of substrates, filling conditions, and ...

New Products

(Magazine)

June 29, 2005, ... to environmental influences such as heat and humidity. New system has been integrated into company’s QMS Series. EB System Integrates Easily Energy Sciences, Wilmington, MA; 978/694-9000; ...

Truth or Myth?

(Magazine)

May 30, 2005, ...  Truth or Myth? Some packagers believe ambient conditions, especially temperature and humidity, might affect slide angle during testing or throughout processing. Truth. We tested several samples under ...

Detecting the Edge

(Magazine)

March 30, 2005, ... Detectors First-generation edge detectors can be influenced by a variety of environmental and process factors that degrade accuracy, including temperature, humidity, air turbulence, vapors and gases, ...

New Product Digest, Part 1

(Magazine)

November 29, 2004, New products from: Rotatek, HCI Converting Equipment Co., Maguire Products, Sterling Toggle, Battenfeld Gloucester Engineering, NexGen Enviro Systems, Pinnacle Converting Equipment, Davis-Standard, Agfa, ...

PFFC Worldwide Special Report on Release Liners, part 2

(Archive)

October 30, 2004, ... of the p-s adhesive’s property measurements: other factors affecting accuracy and precision are material conditioning and environmental control of temperature and humidity. Test panel condition, cleaning, ...

Products, Part 1

(Magazine)

September 29, 2004, ... 50x/sec. Compensates for changes in relative humidity, barometric pressure, and other factors that influence the speed of sound. Image Plates with UV Light Esko-Graphics, Vandalia, OH, USA; 937/454-1721; ...

Using a Chemical Primer for High Bonds & Low Oxygen Transmission

(Magazine)

April 30, 2004, ... relative humidity, air velocity, air volume, etc., influence drying. A thin, dry coating will result in better adhesion and oxygen barrier performance than a thick, wet coating. EXPERIMENTAL WORK The ...

Converting Industry News

(Magazine)

February 28, 2004, ... need good barrier to humidity, Ditmar adds, which theComposipac structure provides. IBC Has Many Strengths Reusable and tough, the Multi-Trip Bin ten-ply corrugated Intermediate Bulk Container (IBC) ...

Products

(Magazine)

September 29, 2003, ... plasma are less affected by long-term exposure to temperature and humidity. Low-Profile Load Cell Is Cooler, Lasts Longer Cleveland Motion Controls, Cleveland, OH; 216/524-8800; cmccontrols.com The ...

New Products for the Converting Industry (2 of 2)

(Magazine)

March 31, 2003, ... riverwood.com DiscoverSustain is a high-compression-strength, sheeted, unbleached kraft paperboard designed as an alternative to microflute. Said to eliminate humidity-induced curl, delamination, and ...

New Product Digest, Part 2, PFFC, April 2003

(Magazine)

March 30, 2003, ... designed as an alternative to microflute. Said to eliminate humidity-induced curl, delamination, and washboarding. Two-sided coating printing surface expands promotional and graphic opportunities, co. ...

Products at CMM

(Magazine)

March 31, 2001, ... high-impact PS and are highly nestable, saving warehouse space. They are said to be dust-free and aren't affected by moisture or humidity. Visit Booth 25085 at CMM International. The big show is almost ...

Products

(Magazine)

February 28, 2001, ...  Control Humidity with High Precision Electro-Tech Systems Inc., Glenside, PA; 215/887-2196 The Model 514 automatic humidity controller is said to control relative humidity precisely over the entire ...

Modifying Adhesives for Superior Performance

(Magazine)

February 28, 2001, ... added to five adhesive samples. The adhesives were cast into films and then exposed to varying levels of humidity. Reviewing the data, it is evident that the adhesive system is affected minimally by ...

Materials and Products for the Converting Industry

(Magazine)

August 31, 2000, ... Problems of Low Humidity Nortec Industries Inc., Ogdensburg, NY; 315/425-1255 Airfog nozzle humidification systems have output capacities ranging from 2-25 lb/hr/nozzle, which mfr. says will help users ...

Anilox Rolls Are Key When Printing Corrugated Board

(Print)

July 31, 2000, ... other material can compete with its strength and stiffness. However, paper is a natural product and is always changing due to the humidity. We use heaters to keep the moisture of the paper between 8 and ...