Search
- Crosslinking Agents Can Improve Physical Properties
- (Magazine)
- September 30, 2001, One of the key areas of ink/coating formulation is the use of crosslinking additives to improve physical resistance properties, such as ink adhesion and One of the key areas of ink/coating formulation ...
- VOC-Compliant Inks: What State Are They In?
- (Magazine)
- September 30, 2001, ... VOC reduction in water-based ink formulation is continuing — whereas 5% was the target a few years ago, 2% or lower is the current target. The desire for lower VOC emissions favors UV, since this technology ...
- Three Shows Make Autumn a Season of Innovation
- (Magazine)
- August 31, 2001, ... equipment and process control; advances in photochemistry and polymerization; raw materials and formulation; analytics; new applications; and more. Among the exhibitors will be Akzo Nobel Resins; BASF; ...
- New Product Digest
- (Magazine)
- August 31, 2001, ... defoaming chemistry combined with colorants, resins, and additives. This formulation reportedly assures that presses will perform without micro-foam voids and that anilox cells will be filled with ink. ...
- Hot Melt Symposium Offers Varied Program
- (Magazine)
- August 31, 2001, ... and building blocks and the wide latitude in formulation point to development of more “innovative bonding solutions using hot melt adhesives.” Technical Presentations The program for the ...
- Polymers/Laminations/Adhesives/Coatings/Extrusions
- (Magazine)
- June 30, 2001, ... (PSTC-6), Polyken probe tack (ASTM D2979), loop tack (ASTM D6195), 180° peel (PSTC-1), shear (PSTC-7 using 25 × 25 mm with 1 kg), and melt viscosity (ASTM D3236). Results Table I shows a typical formulation ...
- Division Conference Offers Varied Program
- (Magazine)
- May 31, 2001, ... on “Advances In Polypropylene For Extrusion Coating” will discuss process development studies and recent advancements in resin formulations that have shown that new polypropylene grades can be efficient ...
- The Sweet Smell of Success in Coatings and Adhesives
- (Magazine)
- April 30, 2001, ... applications, odors of almost any sort are unacceptable. Most adhesives and coatings use high-molecular-weight polymers as the principle active ingredient in their formulations. Other ingredients such ...
- Hot Melt Committee Holds Annual Symposium
- (Magazine)
- March 31, 2001, ... and their applications.” Introductory Tutorial The symposium will open on June 10 with a tutorial using the theme “Back To Basics.” It will review raw materials, formulation techniques, and process ...
- In This Industry, Green Doesn't Always Mean G
- (Magazine)
- February 28, 2001, ... coating formulation. After application of the coating to the substrate, this slip additive slowly migrates through the coating and forms a layer on the surface that provides the necessary COF. Obviously, ...
- Wide vs Narrow Web FlexoIt's More Than Just the Widt
- (Magazine)
- February 28, 2001, ... hundred feet per minute. This difference in press speed has a major impact on the ink formulation composition. Wide web inks utilize faster drying solvents, and most jobs require very low solvent retention ...
- On the Move...
- (Magazine)
- February 28, 2001, News from: AIMCAL, Bobst Group, Brandtjen & Kluge, BST Pro Mark, Corotec, Electrostatic Discharge Assn., DuPont Teijin Films, Econo Products, Elite Cameron, General Formulations, Gravure Education ...
- Formulators Look Beyond the Peel, Tack, and Shear Profile
- (Magazine)
- January 31, 2001, ... if they are concerned about their converting speeds. On the flip side, what we've seen with the emulsions is the formulation of a broader temperature range of application." Anderson adds there is new, ...
- Assessing Inks, Dealing with DigitalThe NPIRI Conference
- (Magazine)
- December 31, 2000, ... Assessment (CTSA)." She compared solvent-based, water-based, and UV-curable inks on wide web from cost, energy, environmental, and health perspectives. More than 45 formulations were involved. Solvent- ...
- In-Mold Labeling Makes Strides Worldwide
- (Magazine)
- December 31, 2000, ... this proves to be the case, the engineering complexities of reel-fed systems will improve through evolution." Successful in-mold label production requires special ink formulations, printing processes ...
- Materials
- (Magazine)
- December 31, 2000, ... paper and boardstocks. Also available in a fade-resistant formulation. VinylCure is formulated for credit and ID cards that are laminated, as well as for "smart cards" that are clear overcoated. DryCure ...
- Materials
- (Magazine)
- November 30, 2000, ... as Pantone formulations. Inspect Adhesive Patterns without Additives Nordson Corp., Duluth, GA; 770/497-3715; nordson.com The VeriTec G-Net verification system provides real-time monitoring and on-line ...
- Pilot Coating Line Aids Both R&D and Production
- (Magazine)
- October 31, 2000, ... and development playing such a large role in producing new formulations for its more than 1,200 customers, MSC found itself utilizing full-scale production equipment to develop and test new adhesive/ coating/substrate ...
- Coating Tech Center Is a Dream Come True
- (Magazine)
- October 31, 2000, ... product formulations, or even to complete small-scale product runs. The response, he says, has been "fantastic and growing." Checking Out Slot Die Process The Coating Technology Center, which opened ...
- Digital News for the Converting Industry
- (Magazine)
- October 31, 2000, ... announced the reformulation of its 2000 Fall-Winter Color and Appearance Seminar program. According to the co., the new format gives attendees the option of attending one or both of the day sessions. The ...
