Search

UK-based UV Curing Specialist, GEW, Introduces Fully Air-cooled UV LED Curing System

(News | New Products)

February 02, 2022, ... of LED printing. The first significant innovation is in the air-cooling process. Cool, filtered air is distributed from a single centralized fan sited away from the press and exits through the UV lampheads, ...

Thermal Transfer Core Design and Performance in Today’s Markets

(Web Handling)

January 23, 2022, ... the path to achieving optimal performance can be complex. When cooling the roller surface, heat is pulled out of the substrate, creating a change in properties. It can cure the web into a solid state, ...

Rust to Tech, Part II

(Coating/Laminating)

December 19, 2021, ... a positive vapor pressure causing rapid drying. In fact, this drying is so rapid that the evaporation causes a cooling effect with the substrate being cooler leaving the dryer than it was before entering, ...

Rust to Tech, Part II

(Converting Perspectives)

November 28, 2021, ... a positive vapor pressure causing rapid drying. In fact, this drying is so rapid that the evaporation causes a cooling effect with the substrate being cooler leaving the dryer than it was before entering, ...

Trexel and Bockatech Partner to Increase Benefits and Scope of Foamed Packaging Applications

(News | New Products)

October 03, 2021, ... inner and outer faces of the container walls by cooling, that have molten and foaming resin in the center. Typically using EcoCore results in a weight saving of around 30 percent compared to traditional ...

Maintenance: The Key to Keeping Your Corona Station in Full Production

(Equipment/Machines - Converting)

July 18, 2021, ... if excessive debris collects around the electrodes, the cooling effect from the ozone exhausting will be diminished which could lead to overheating, and eventual failure of the electrodes. Assuring ...

Marvaco Moves to New Facilities in Finland with New Technology – a Major Step Towards Carbon-Neutral Production

(News | New Products)

May 24, 2021, ... can be achieved through energy-conserving building engineering and geothermal heating and cooling. In addition to these, the operations also use electricity from renewable sources. At the same time, ...

Palsgaard’s Pellet Line Expansion Supports Growing Demand for Food-Grade Plant-Based Polymer Additives

(News | New Products)

January 31, 2021, ... aids. All products have full FDA and EU food-contact approvals. In addition to the new pellet line, Palsgaard is investing in an advanced spray cooling tower that will reportedly raise the company’s ...

SABIC Launches Innovative TF-BOPE Film for Frozen Food Packaging

(News | New Products)

October 19, 2020, ... requires less cooling time which increases packaging speed even more. During the evaluations, a constant speed of 130 bags per minute was achieved. For packers, TF-BOPE film delivers a robust sealing ...

What to Look for in an Air Ring – Blown Film Series Part IV

(News | New Products)

August 11, 2020, ... of air rings, which cool and control the film bubble as it inflates and is key to high productivity and film quality. The cooling system consists of a blower, chiller, ducting, and air ring entry to ...

Coating on Trial

(News | New Products)

May 05, 2020, ... fluctuations in temperature and web cooling over chill rolls will affect the web at selected points in the process.  Differences in the film such as gauge band variations will affect the thickness of the ...

Davis-Standard’s Global Equipment Platform at Plast Eurasia

(News | New Products)

December 01, 2019, ... to the barrel; an AC drive and motor; and a high capacity air-cooling system. It has been an effective option for pipe and profile, sheet, fiber and specialty system processes, among others. MEDD Extruder ...

Modular Extrusion Control System for Blown Film Maximizes Productivity of New and Existing Production Lines

(Coating/Laminating)

October 31, 2019, ... productivity and reducing scrap. ---IBC and Layflat Controls. Syibc™ IBC control automatically manages blower balance while coordinating all blower functions; the Vortyx™ integral cooling device increases ...

Assessing the Sustainability Benefits: Flexible Drink Pouch — A LCA Case Study

(Case Studies)

May 01, 2019, ... amounts of water during manufacturing as part of the cooling process. The flexible drink pouch has lower overall greenhouse gas emissions because of its light weight and overall efficient material and ...

CTG Max™ Electrode: Pillar Technologies

(News | New Products)

April 23, 2019, ...  Does not require internal cooling for treating of most web materials. Internally-cooled design available for thermally- sensitive materials and for plasma system applications. Low maintenance, rigid ...

IPCO Introduces Continuous Film Casting System Combining Precision Slot Die and Compact Venturi Dryer at ICE USA

(Upcoming Conference News)

March 31, 2019, Process systems manufacturer IPCO has introduced a high precision continuous casting system that enables the production of membrane and film products to exceptionally narrow tolerances. IPCO’s innovative ...

Davis-Standard’s Global Equipment Platform with Bernal Industrial and Grupo Janfrex at Plastimagen Mexico® 2019

(News | New Products)

March 31, 2019, ... double reduction gearbox; cast aluminum finned heaters bolted to the barrel; an AC drive and motor; and a high capacity air-cooling system. It has been an effective option for pipe and profile, sheet, ...

Will it Process?

(Extrusion Coating)

December 11, 2018, ... gravure coating/hot air drying/lamination/cooling or knife over roll coating/hot air drying/lamination, etc. Systems can be configured for clean room conditions; hot air, infrared and UV curing can be ...

SHOW PREVIEW | Pack Expo Chicago October 2018

(News | New Products)

October 07, 2018, ... “Showcase of Packaging Innovations®.” In the South Hall, The Confectionery Pavilion is where you’ll find aeration, batch refining, shaping, enrobing and cluster production solutions as well as cooling ...

An In-Depth Look at Extrusion - Part 1

(Tom’s Poly Ploys)

September 11, 2018, ...  A gearbox An extruder barrel An extruder screw A system for heating and cooling various extruder components A feed system to introduce plastic pellets into the extruder barrel A filtration ...