Coatings

Overcoats Offer Protection (and You Don't Have to Button Up)

Published: February 01, 2002, By David J. Bentley Jr., RBS Technologies

Printed paper is a key ingredient in many packages and labels. And whether the printing provides information, graphics, or both, it has to be protected.

Polymers / Laminations / Adhesives / Coatings / Extrusions

Published: November 01, 2001, By David J. Bentley Jr., Editor

Providing practical information to the converting and packaging industries

Making Choices for Coating with a Laminating Adhesive

Published: October 01, 2001, By David J. Bentley Jr., RBS Technologies

Work, like life, is full of choices. Some are major; some are the kind we face every day. Converters laminating two substrates together using an adhesive

Vacumet Makes Metallizing Dreams Come True

Published: September 01, 2001, By Robert W. Marsh, Contributing Editor

The entrepreneurial spirit thrives at Vacumet Corp., feeding on acquisitions, expansions, perseverance, and good timing. What makes a dream come true

TAPPI Polymers, Laminations and Coatings Div. Awards 2002 Klucken Scholarship

Published: September 01, 2001

The Polymers, Laminations and Coatings Division has awarded the 2001 Ralph A. Klucken Scholarship to Shilpa Sankhe, a Ph.D. student in chemical engineering at Clemson University.

So You've Seen a Ghost! Who You Gonna Call?

Published: August 01, 2001, By Richard M. Podhajny, Ph.D., Contributing Editor

Many of us enjoyed watching Bill Murray conquer the ghosts that he encountered in the movie Ghostbusters. So, you ask, what do ghosts have to do with

Polymers/Laminations/Adhesives/Coatings/Extrusions

Published: August 01, 2001, By David J. Bentley, Jr., Editor

Providing practical information to the converting and packaging industries

Polymers/Laminations/Adhesives/Coatings/Extrusions

Published: July 01, 2001, By David J. Bentley Jr., Editor

Providing practical information to the converting and packaging industries

Antimicrobial Additives and Coatings for Food Packaging

Published: June 01, 2001, By Richard M. Podhajny, Ph.D., Contributing Editor

It seems as if every day we hear of some incident associated with food contamination. Recent outbreaks of contamination associated with meat products

The Sweet Smell of Success in Coatings and Adhesives

Published: May 01, 2001, By David J. Bentley Jr., RBS Technologies

Contamination is a frequent cause of odor in adhesives and coatings applied to a substrate. This normally occurs inadvertantly in the facilities of the formulator or at the converting plant.

A Primer on How to Put Substrates Together

Published: March 01, 2001, By David Bentley, Contributing Editor

To extrusion coat, extrusion laminate, or film laminate? If a composite construction is your goal, there is more than one way to get there.

A Communication from the PLACE Div. of TAPPI

Published: January 31, 2001

A Communication from the Polymers, Laminations and Coatings Division of TAPPI.

Conversing on Centuries, Computers, and Converting

Published: January 01, 2001, By David J. Bentley Jr., RBS Technologies

The three words in the title seem to have no relationship or connection. Or do they? As we begin 2001, we start a new century. Since centuries comprise

The Influence of Aluminum Gauge on the Adhesion of Extruded Polyester to Foil Using Adheisve Primers

Published: January 01, 2001, By Richard B. Allen and Bruce Foster, Mica Corp.

Application: Adhesion primers are effective when the thickness of polyester resin extrudate to aluminum substrate thickness exceeds a ratio of 0.7.

Coating Operation Starts a Tradition of Growth

Published: December 01, 2000, By Teresa Koltzenburg, Senior Editor

Venture Coating Technologies, located in what once was a Wisconsin cornfield, is striving to be much more than a budding converting plant. Moving the process along is a slot-die coater assembled by Dri-Tec.

The Case Against Oxidation as a Primary Factor for Bonding Acid Copolymers to Foil

Published: December 01, 2000, By Barry Morris & Naozumi Suzuki, E.I. du Pont de Nemours and Mitsui-du Pont Polyechemicals

Application: Acid copolymers will generally adhere more strongly to foil than low density polyethylene even when processing the acid copolymer at lower temperatures. This reduces the potential for taste, odor, processing, and other problems associated with high temperature processing.

Some Causes of Blocking in Heat Seal CoatingsPart II

Published: November 01, 2000, By David J. Bentley Jr., RBS Technologies

Last month this column covered some causes of blocking when using heat seal coatings. The problem primarily addressed concerned processing conditions