Cores

The Leader in Web Handling Expertise and Innovation

(Coating/Laminating)

February 06, 2023, As the only solutions provider with all capabilities in-house, American Roller is proud to be a trusted and dependable supplier of custom cores, high-release coatings, and durable coverings. As ...

Winding: Part 3 - Tension, Nip and Torque

(Web Handling)

January 22, 2023, ...  By definition any surface winder will have both tension and nip. A surface winder with center wind assist adds torque to the coreshaft. Sophisticated belted reels use all three TNTs to build large rolls ...

Winding Part 3: Tension, Nip and Torque

(Converting Expert)

January 16, 2023, ... By definition any surface winder will have both tension and nip. A surface winder with center wind assist adds torque to the coreshaft. Sophisticated belted reels also use all three TNTs to build large ...

Finzer Roller, Inc., Announces Recent Acquisitions

(News | New Products)

December 21, 2022, ... Pennsylvania, and Texas. Finzer Roller is a one-stop resource for new cores, core repairs, rubber, urethane, and specialty coatings. The company services the film and foil, packaging, furniture, corrugated ...

Winding: Part 2

(Roll Handling)

December 18, 2022, ... to use a nominal length that is as long as possible that will facilitate the length measurement on the roll. You should be able to measure to 1mm accuracy. Use a 250mm repeat pattern for 3” cores; 500mm ...

American Roller Acquires Big River Roller

(News | New Products)

December 13, 2022, ... cores, covering, and coatings capabilities and expands this strategy with the acquisition of Big River. “What Big River accomplished in building their business in a relatively short amount of time is ...

Wound Roll Mechanics: Part 2

(News | New Products)

December 12, 2022, ... for 3” cores; 500mm for 6” cores and 1000mm for 20” cores. This will allow measurements all the way to the core.   Figure 4 documents the Stored MD strain on roll and off for another roll of tissue. ...

Maximizing Labor, Time and Safety with Slitter Rewinder Automation

(Equipment/Machines - Converting)

October 09, 2022, ... compared to non-automated. It also promotes time savings and operator safety. Following are automation options and the benefits: Turreted rewind – One operator can unload rolls and position cores during ...

New Era Converting Machinery Presenting Solutions for Battery Materials Production at The Battery Show

(Upcoming Conference News)

August 15, 2022, ... with industry leaders such as Coreshell Technologies, and other new orders related to battery materials manufacturing in the works, New Era is a leader in providing material processing solutions to the ...

Ox Industries Acquires 150,000-square-foot Facility

(News | New Products)

May 22, 2022, Ox Industries has acquired a 150,000-square-foot facility in Hanover, PA, to expand its converting capacity in the Mid-Atlantic Region.  Ox Industries has acquired a 150,000-square-foot facility in ...

Pros and Cons of In-line Slitting

(Equipment/Machines - Converting)

April 17, 2022, ... diameters. High quality, high-speed transfers and good starts on new cores with 100 percent consistency: New transfer systems produce straight-line cuts and transfer the slit web directly to the new ...

The Importance of Roll Cleaning and Maintenance

(Surface Prep)

April 11, 2022, ... Ease of use. What have your operators used in the past? And service. Sonic Solutions scores an A+ in each of these categories. Customers come back to us time and again to help them. We take pride in ...

Nonwovens Trends Addressed at IDEA®22

(News | New Products)

March 14, 2022, ... provide an immersive dive into the latest nonwoven technologies, industry segments and more with courses on absorbent hygiene cores, making nonwovens, industrial wipes and consumer wipes. A must-attend ...

Comexi's Innovative Technology Enables Wipak UK to Provide More Sustainable Solution

(News | New Products)

February 09, 2022, ... due to its state-of-the-art control elements and high degree of automation. Cores, knives, laser heads, photocells and almost every adjusting element of the machine are self-calibrating, as a result of ...

Maxcess Launches the Tidland D6X Differential Air Shaft

(News | New Products)

January 27, 2022, ... tension control and core stops, the D6X allows for high weight capacities while supporting odd and larger sized cores for a wide range of applications. With core stops three ways around, customers will ...

Thermal Transfer Core Design and Performance in Today’s Markets

(Web Handling)

January 23, 2022, ... multiple web substrates and widths. Along with quick change options when damage or wear occurs, it also allows the converter to stock an inventory of covered sleeves vs entire roll cores.  Engineered ...

The Leader in Web Handling Expertise and Innovation

(Web Handling)

January 10, 2022, As the only solutions provider with all capabilities in-house, American Roller is proud to be a trusted and dependable supplier of custom cores, high-release coatings, and durable coverings. As the ...

Go Jumbo - Supply55 and NEPATA Release the New JC770 and JC1650 Jumbo Unwinders for the UA770 and UA1650 ADWS

(News | New Products)

December 12, 2021, ... JC1650 via a safety chuck and lock it in place. The JC770 and JC1650 supports 3-inch and 6-inch cores allowing the device to process a wide range of media. Benefits of NEPATA JC700 and JC1650 Jumbo Unwinders ...

Looking for Custom Converting Solutions?

(Equipment/Machines - Converting)

October 10, 2021, ... to .008 in.) and non-standard width slitting to very close tolerances (+/-.001 in.).  Put-ups: 3 in and 6 in. I.D. cores , reels, hubs and standard coils, straight and tapered traverse, others to specs. ...

Mail Solutions and Savings, the Jacksonville, FL Division of TC Delivers Recently Added Rollem’s TR Slitting Technology to Support KM-1 Ink-Jet Press

(News | New Products)

October 06, 2021, ... paper. This single-pass, multiple-processing workhorse performs slits, scores, and perforates to eliminate additional labor and extra guillotine workstations with production speed up to 15,000 sph. Hardened ...

Strong S.A. Invests in a High Productive Comexi S1 DT to Automate Its Processes

(News | New Products)

September 01, 2021, ... due to its state-of-the-art control elements and high degree of automation. Cores, knives, laser heads, photocells, and almost every adjusting element of the machine are self-calibrating, as a result of ...

Sun Chemical and DIC Corporation Finalizes Acquisition of BASF’s Global Pigments Business

(News | New Products)

June 29, 2021, ... deal allows us to compete in the global marketplace more effectively going forward, while strengthening our pigment footprint in Europe. It underscores our commitment to delivering solutions tailored to ...

Worldwide Plastics and Rubber Industry Focuses on K 2022

(News | New Products)

June 10, 2021, ... sector renewed orientation after the changes caused by the COVID-19 pandemic. K is not only the venue for groundbreaking new products every three years, but also underscores its special status by addressing ...

Go Coreless - Supply55 and NEPATA Release the New UA770 30-Inch Coreless Rewinder/Trimmer

(News | New Products)

June 08, 2021, ... of cores when rewinding,” said Chase Pender, marketing manager, Supply55, Inc. Benefits of the NEPATA UA770 Coreless Rewinder/Trimmer include: Up to one hundred forty (140) five (5) foot rewinds ...

IDEA The Triennial Event for Nonwovens & Engineered Fabrics Spotlights Post-Pandemic Global Trends and Market Intelligence for 2022 Conference Program

(News | New Products)

May 19, 2021, ... wipes, consumer wipes, absorbent hygiene cores, and patent searching. Each course provides a detailed overview designed to give newcomers basic skills or to enhance their knowledge about patents for ...

Increase Productivity with Slitter Rewinder Automation

(News | New Products)

April 12, 2021, ... short and maintain web alignment/tension on outside wraps. The flying razor web cut-off system can be upgraded to shear or score. Auto core cutting/placement – Auto cuts cores and positions them directly ...

In the Spotlight: IMS Technologies Q&A

(Equipment/Machines - Converting)

March 29, 2021, ... knives, automatic loading and positioning of the rewind cores, automatic tape application, closure of the finished rolls, unloading of the finished rolls including additional unloading station. Furthermore, ...

Leading manufacturer of quality Core Chucks, Mandrels and Core Cutter Machines since 1958

(Equipment/Machines - Converting)

January 18, 2021, ... We also make Custom Chucks. The Adapter series is used on machines equipped with 3” air mandrels. For orders requiring larger cores, it is a less expensive option rather than buying larger expensive ...

The Leader in Web Handling Expertise and Innovation

(Equipment/Machines - Converting)

January 18, 2021, As the only solutions provider with all capabilities in-house, American Roller is proud to be a trusted and dependable supplier of custom cores, high-release coatings, and durable coverings. As the ...

Roberts Mart Acquires Comexi S1 DT Slitter and Remains at the Forefront of the Flexible Packaging Market

(News | New Products)

October 13, 2020, ... most demanding projects, due to its regulated control elements and high degree of automation. Cores, knifes, and almost every machine adjustment part is self-calibrating, resulting from an extremely interactive ...