Search
- What the Coating Bead Can Tell You
- (Coating Matters)
- August 21, 2011, ... most common piece of equipment utilized to improve coating bead behavior is a vacuum box. This box seals against the slot die and the precision backing roll. A displacement of air and pressure differentiation ...
- Surface Energy Matchmaking
- (Coating/Laminating)
- July 31, 2011, ... of the fluid, allowing it to wet out over the substrate. Promote adhesion at the coating interface | Sometimes the surface energy is only part of the reason for poor adhesion, and a vacuum at the coating ...
- Drives Motors: From Zero to 800
- (Label/Tape)
- June 30, 2011, ... also fabricated a new dancer assembly for the rewind section of the coating line, added lay-on rolls, and modified the knife on the splicing assembly. A new five-zone dryer, entrance vacuum roll, and exit ...
- Tab Inserter Aids Productivity
- (Inspection/Defect Detection)
- June 30, 2011, The RTIS 2 roll tab inserter system is said to minimize waste and ensure higher levels of productivity. Eliminates dangerous hand flagging. Can attach The RTIS 2 roll tab inserter system is said to minimize ...
- Slit Many Substrates
- (Slit)
- May 31, 2011, ... film, foil, and laminates, it is available in widths from 1,000-1,800 mm. Vacuum roller for tension isolation point means no nip rollers or S-wraps. Ashe America | 802-254-0200 | www.ashe.co.uk ...
- AIMCAL Awards: Canisters Blow Away Competition
- (Metallizing)
- March 31, 2011, ... *The Vacuum Metallized or Coated Product of the Year Award honors the late Peter Rigney, former publisher of PFFC, who died in 1997 and was a long-time champion of AIMCAL and the competition. ...
- AIMCAL Awards: Canisters Blow Away Competition
- (Coating/Laminating)
- March 17, 2011, Winning entries are recognized for excellence in AIMCAL's annual Vacuum Metallized or Coated Product, Sustainability, and Technology of the Year Competitions During the Assn. of Intl. Metallizers, Coaters ...
- Coating & Laminating Special Report 2011
- (Special Reports)
- March 06, 2011, ... Update: Coating & Laminating Special Report: Still Growing Feb 1, 2011 12:00 PM, By Dr. William Llewellyn, AWA Alexander Watson Assoc. In the world of packaging, vacuum-coated products offer converters ...
- Surface Treating: Promoting Adhesion
- (Surface Prep)
- February 28, 2011, ... over this period because of their technical significance in eliminating the need for batch-processing vacuum chambers to ensure the maintenance of a negative pressure, while in practice delivering very ...
- SPR Packaging Reclaims Press Wash Solvent
- (Flexography)
- January 31, 2011, ... features an electronically controlled distillation process conducted under vacuum to increase efficiency. The result is clean, distilled, original solvent ready to use. PPC Technologies & Solutions ...
- Coating Matters: Don't Blame Chatter on Coating Hea
- (Coating/Laminating)
- January 31, 2011, ... a piece of stabilizing equipment. One option is a vacuum chamber at the site where the fluid interacts with the substrate. A vacuum box can stabilize the substrate/fluid interface and reduce variation. ...
- Show Preview - Forecast for Orlando: ICE
- (Trends/Management)
- January 31, 2011, ... Pressure-to-Vacuum (ATV) Modules for Web Processing: Vincent Cannella, Energy Conversion Devices Improved Web Handling Through Precise Tension Control & Splicing Accuracy (or The Perfect Butt): Joseph ...
- Web Cleaning: To Contact or Not?
- (Web Cleaning)
- January 31, 2011, ... to handle any substrate in the future. The majority of systems invariably rely on some form of vacuum, although this on its own is unlikely to be sufficient. Whatever the technology employed, to operate ...
- New Static Control Cleaning Systems at Pack Expo
- (Static Elimination)
- October 03, 2010, ... which breaks any static bond holding contamination to the inner surface. The released contamination is caught immediately by the vacuum airflow and extracted to the in-line filter unit. The HEPA filtration ...
- Pilot Coaters: Small Volume, Big Advances
- (Coating/Laminating)
- September 30, 2010, Until recently, development of laboratory and pilot coater technology has been relatively stagnant. The many improvements increased coating speeds, improved Until recently, development of laboratory ...
- Barrier Films: SiOx Barrier Benefits
- (Coatings)
- September 30, 2010, ... coating, Ceramis, comprises a thin inorganic layer of silicon oxide that has been evaporated in a vacuum environment to substrates like polyethylene terephthalate (PET), oriented polyamide (OPA) and biaxially ...
- Bobst Group to Present Latest Technologies at K 2010
- (Flexpack News)
- September 27, 2010, ... from October 27 to November 3, on Stand 3–D52 in Hall 3. This will include both primary and secondary slitting and rewinding from Atlas & Titan (UK) solutions in vacuum web coating & metallizing from ...
- Coating Line Added for Customer Use
- (Coating/Laminating)
- July 31, 2010, ... curtain, vacuum slot, off-roll, and multilayer) for the Coatema line, which can coat solvent- and water-based materials and 100% solids. Premier Dies Corp. | www.premierdies.com Circle 314 or visit ...
- Laminating Corona Treating: Bond Boosting
- (Corona, Flame, Plasma)
- July 31, 2010, ... flexible packaging to food, beverage, food container, and industrial companies. In addition to lidding films, Golden Eagle produces fresh-cut produce bags and film, vacuum pouches, shrink bags, bakery ...
- A time to celebrate
- (Special Reports)
- April 30, 2010, ... the industry. Each blog features an expert in that area. www.WebCoatingBlog.com — Dr. Ed Cohen www.VacuumCoatingBlog.com — Dr. Charles Bishop www.WebHandlingBlog.com — Dr. David Roisum www.SpecialtyWebCoatingBlog.com ...