Search

Materials Suited for Healthcare Uses

(Print)

June 30, 2010, ... healthcare requirements for exposure to moisture, solvents, extreme temperature changes, and sterilization conditions. Avery Dennison, Fasson Roll North America | 800-944-8511 | www.fasson.com Circle ...

Medical Packaging: How To Avoid Public FDA Criticisms

(News | New Products)

June 24, 2010, A ten-step technical guide, “How to Avoid and Respond to Public FDA Criticisms—Form 483 Letters—for Temperature, Humidity and other Controlled Environments” is now available from Veriteq A ten-step technical ...

Flexpack: DuPont Honors Innovation

(Flexpack)

May 31, 2010, ... packaging system, designed to ensure the safe transport of medical supplies. The greatest challenge in shipping temperature-sensitive materials, such as pharmaceuticals or blood supplies, is maintaining ...

Coating Has High Impact Strength

(Coatings)

May 31, 2010, PC-32000 coating is said to offer properties similar to standard Teflon coatings but with higher wear and impact strength at high temperatures. With a PC-32000 coating is said to offer properties similar ...

Blade Coatings: Prolong Blade Life

(Slit)

May 31, 2010, ... building the final result and providing greater control over thickness and uniformity. The processes and equipment used allow the blades to be coated at temperatures less than 250 deg, in many applications, ...

Trends in technology

(Coating/Laminating)

April 30, 2010, ... energy by minimizing time and temperature of mixing. Reduce solution delivery system energy by holding solution at low temperature and heat immediately prior to coating application. Recycle all scrap ...

A future for photovoltaics

(Metallizing)

April 30, 2010, ... of material and surface area, thus reducing the radiant heat loss and achieving the same temperature at lower power. At least one system manufacturer offers an economy operating mode in which various ...

High Cooling Power Is Available

(New Products)

April 30, 2010, ... water to cool one side of the heat exchanger while de-ionized water (or a coolant of choice) on the second side is used to cool the application. The application loop is temperature controlled to better ...

Techniques to Prevent/Minimize Die Lines

(Tom’s Poly Ploys)

April 28, 2010, ... die design varies between processes, the extrusion process is universal. If the temperature the polymer is exposed to is too hot, the rate of polymer degradation will accelerate. If the polymer is exposed ...

Narrow Web's Leverag

(Label/Tape)

March 31, 2010, ... of these materials will cause the print surface to see temperatures up to 375 deg F. Therefore, inks and varnishes must be able to withstand these temperatures. Varnishes for the food market must meet ...

Extruder Is for Foam

(New Products)

March 31, 2010, ... temperature with a quick cooldown, called essential in foam extrusion for maximum density reduction. Davis-Standard | 800-599-1010 | www.davis-standard.com Circle 404 or visit www.freeproductinfo.net/pff ...

Multipack Juices It Up

(Metallizing)

March 31, 2010, ... step toward a fully compostable package. Bryce adjusted printing inks along with web tensions, process temperatures, and bonding processes to deliver a lamination that would provide adequate snack food ...

Roller Refurbishing: Replace or Refinish?

(Web Handling)

March 31, 2010, ... production line to run at a lower speed to achieve the correct processing temperature. Considering the priority to keep production going, converters should ask: Can the roll be repaired or refurbished, ...

Laminator Aids Productivity

(Adhesives)

March 31, 2010, ... lamination process, including line speeds to 2,000 fpm; low application temperature (86-95 deg F); easy handling; no misting at high line speeds; fast curing, enabling laminate slitting after 4-6 hours; ...

AIMCAL Awards

(Coating/Laminating)

March 21, 2010, ... step toward a fully compostable package. Bryce adjusted printing inks along with web tensions, process temperatures, and bonding processes to deliver a lamination that would provide adequate snack food ...

Flexible Packaging: Narrow Web's Leverag

(Flexpack)

March 21, 2010, ... the print surface to see temperatures up to 375 deg F. Therefore, inks and varnishes must be able to withstand these temperatures. Varnishes for the food market must meet end-use FDA requirements. End-use ...

PSA Line Expands

(New Products)

February 28, 2010, Expanded line of acrylic transfer PSAs includes the 600 Series (high shear, moderate LSE, and high-temperature shear); 800 Series (lower cost, high peel, Expanded line of acrylic transfer PSAs includes ...

Heat Transfer Fluid Is Stable

(New Products)

February 28, 2010, GLT heat transfer fluid is said to be a thermally stable, economical, high-performance solution for both high- and low-temperature processes. Formulated GLT heat transfer fluid is said to be a thermally ...

Resin Enhances Shrink Applications

(New Products)

February 28, 2010, A film extrusion grade of cyclic olefin copolymer (COC), designated 9903D-10, extends the commercial glass transition temperature range down to 33 deg A film extrusion grade of cyclic olefin copolymer ...

Click To Pick

(New Products)

February 28, 2010, ... with precision to provide the temperature control needed for converting, including flexible packaging applications. Company performs computerized heat transfer analysis in-house to optimize roll design ...