Search
- The PLACE Division of TAPPI Announces Film and Extrusion Coating Short Course
- (The Place)
- January 31, 2004, ... screws Discuss capabilities, specifications, and limitations of various extrusion coating and film equipment Understand the unique equipment and resin requirements for coextrusion applications Understand ...
- G Prime A Rheological Indicator to Predict the Extrusion Coating Performance of LDPE
- (The Place)
- January 31, 2004, ... The extruder screw rpm was set to give 10 g/m2 at 150 m/min. to obtain stable processing conditions. The line speed was then increased in steps of 50 m/min. until the web broke. The line speed at which ...
- Products
- (Magazine)
- January 30, 2004, ... cell. Twin-Screw Extruder a First in Size Range Leistritz, Somerville, NJ; 908/685-2333; leistritz-extrusion.com The ZSE-18 is said to be the first co-rotating, twin-screw extruder in this size range ...
- Converting Industry News
- (Magazine)
- January 30, 2004, ... helpful throughout the planning and implementation process.” Davis-Standard is supplying the complete system, which incorporates three Davis-Standard single-screw extruders; two Coperion co-rotating ...
- A Communication from the PLACE Div. of TAPPI
- (Magazine)
- December 30, 2003, ... materials handling, screw designs, instrumentation, process control, cooling systems, additives, troubleshooting, surface treatment, test methods, and similar topics. All the TAPPI PRESS offerings listed ...
- Exercising Environmental Responsibility: Part 3
- (Unprinted Rolls)
- November 30, 2003, ... store screws, nails, etc., in a home workshop. Someone out there must have a brilliant idea, one even better than this, that can be pursued. David J. Bentley Jr. is a recognized industry expert in ...
- Products
- (Magazine)
- November 29, 2003, ... capacity as standard heavy-duty collars, co. says. Collars feature two precision-machined halves pressed together around an embedded I.D. section and tightened using multiple clamping screws. They provide ...
- Doctor Blade Systems: A Cure for What Ails Your Printing Process
- (Magazine)
- October 31, 2003, ... Allison. “Some use air bladders; others use engineered uniform pressure spring clamping with a simple means of opening and cleaning. Blade holder screws and the tapped holes they engage are an enormous ...
- Corona Collaboration
- (Tapes)
- October 31, 2003, ... If the equipment wasn't cleaned often enough, it would eventually arc track, creating a path to ground through the assembly screws and components causing the equipment to shut itself down automatically. ...
- Cast Film Lines for Barrier Films
- (The Place)
- October 31, 2003, ... universal use of the line for a broad spectrum of applications. For example, the use of only one feed screw capable of processing polyethylene, polypropylene, and polyamide is an absolute requirement for ...
- Products
- (Magazine)
- October 30, 2003, ... backer blades, and printed waste due to blade wrinkles often caused by blade holder clamping screws. System Die-Cuts 9,000 Sheets per Hour Heidelberg USA, Kennesaw, GA; 770/419-6500; us.heidelberg.com ...
- Alcoa Sells South American PET Biz
- (News | New Products)
- October 07, 2003, ... fluid-milk closure market. The co. describes its new Seal-MAX 38mm screw-on/screw-off closure as "a major advance in dairy packaging, designed to prevent leakage in milk containers, yet is easy to open ...
- Just Rolling Along
- (Archive)
- September 30, 2003, ... drive assemblies into production equipment is routine for the designer, and equipment buyers generally accept the costs of training operators and maintenance technicians to handle screw-based and other ...
- Producing Coextruded High Barrier Heat-Shrinkable Packaging Films
- (The Place)
- September 30, 2003, ... on a motorized ball/screw assembly for height adjustment. A layflat width control system with a sensor mounted after the nip will monitor and maintain layflat width by raising or lowering the nip assembly ...
- Products
- (Magazine)
- August 31, 2003, ... parts to be unscrewed or any cable connection. Cleaning the lamp and reflector at regular intervals also is said to be quick. Lug Chuck Introduces New Series Tidland Corp., Camas, WA; 360/834-2345; ...
- European Meeting Presents Large Technical Program
- (Magazine)
- July 31, 2003, ... twin screw extruder with tailored processing steps to achieve optimum coating properties. In “Producing Co-Extruded High Barrier Heat Shrinkable Packaging Films,” James D. Stobie of Macro Engineering and ...
- Coex for Success
- (Magazine)
- June 29, 2003, ... by the blown film process to match cast film capability, increased automation and simplification at the operator level, a truly universal feed screw, and higher speed web handling systems that are more ...
- New Products for the Converting Industry
- (Magazine)
- March 31, 2003, ... Erema North America, Ipswich, MA; 978/356-3771; erema.net Coax recycling system combines a single-shaft shredder with a single-screw extruder into one system said to be ideal for many materials that ...
- New Product Digest, Part 1, PFFC, April 2003
- (Magazine)
- March 30, 2003, ... Recycle Many Materials into Quality Reclaim Erema North America, Ipswich, MA; 978/356-3771; erema.net Coax recycling system combines a single-shaft shredder with a single-screw extruder into one system ...
- Products
- (Magazine)
- October 31, 2002, ... rolls from 18-84 in. dia to 10,000 lb in weight at speeds to 3,000 fpm. Hydraulically powered unit loads the roll using the far chucking arm. Arm moves back and forth through a screw drive to accommodate ...
