Search
- Deluxe Packages Adding New Nordmeccanica Coater-Laminator
- (Coating/Laminating News)
- May 23, 2013, ... with the latest release of the Nordmeccanica signature technology for in-register coating. The system works non-stop full speed during reel changeover and allows for more than 60% savings on scrap rate. ...
- Avery Dennison Matrix Recycling Tool Is Online
- (Green Converting)
- May 20, 2013, Interactive map offers a directory of locations of non-landfill operations or energy-from-waste facilities to help converters divert and process scrap MENTOR, OH | Avery Dennison has launched a ...
- Web Lines | Winding Process Fundamentals, Pt. 2
- (Technical Reports)
- February 18, 2013, ... structure is not necessarily the goal of winding. Just as a skyscraper will have different demands for the building structure of layer near the bottom vs. top, so too will winding rolls have different ...
- PFE Rolls Offers Geared Pull Rolls
- (News | New Products)
- January 25, 2013, Driven rolls pull trim and scrap collection into waiting bins ORANGE, MA | Geared Pull Rolls from PFE Rolls are designed to pull scrap web material or trim into awaiting scrap bins or recycling ...
- General Labels Increases Throughput 40%
- (Label/Tape)
- January 10, 2013, ... Labels increased its production throughput by nearly 40%. Jose Gerardo, president of General Labels, said, “We needed to increase our hourly throughput, and we also wanted to reduce our scrap. There ...
- ExxonMobil Chemical Introduces Conformable Film for Labels
- (Film)
- October 22, 2012, ... stripping help optimize film speed, lower scrap rates and reduce reworking of labeled containers. “This new conformable film delivers consistent performance throughout the entire life cycle of the product,” ...
- Appleton Core Recycler Can Be Customized
- (Green)
- October 21, 2012, ... leftover roll material. The scrap material, such as paper, film, foil, plastic, or nonwovens can then be recycled and the core reused. In-stock configurations, the unit can handle rolls to 32 in. dia, ...
- Erema Opens Center for Reclaimed Plastic Trials
- (Flexpack)
- July 25, 2012, Customers of Erema can run reclaim in a new center in Austria, helping them evaluate performance of the plastic scrap for specific applications IPSWICH, MA | Erema, specializing in the development, ...
- Labelexpo Americas | Mission Possible
- (Label/Tape)
- July 12, 2012, ... and 20% savings in scrap materials. The company will participate in the Technology Workshop with the L350 Laser Cutting System. Features include proprietary XY registration capabilities, single source ...
- Domino Printers Have New Capabilities
- (News | New Products)
- July 09, 2012, ... consumables in which the ink and filters are separated from the pump and associated electronics. This allows for a clean and simple change of ink and filters without having to scrap viable, functioning ...
- Addex System Aids Bubble Control
- (Thickness Gauging)
- April 27, 2012, ALF system for gauge control from Addex optimizes bubble control and helps cut scrap, while an IR-based sensor aids thickness measurement STOUGHTON, MA | Addex introduces two gauge-control enhancement ...
- GN Thermoformer Saves Waste
- (Green)
- April 17, 2012, The cut-in-place GN760 plug-assist thermoformer from GN Thermforming Equipment is said to save energy and reduce web scrap CHESTER, NOVA SCOTIA, CANADA | GN Thermoforming Equipment offers the cut-in-place ...
- NPE2012 Has Exciting Opening
- (Substrates)
- April 01, 2012, ... there is widespread emphasis on energy efficiency, increased productivity, and scrap reduction. Specialized technologies include micro-molding, multi-material processing, and in-mold labeling and assembly. ...
- Slitting/Rewinding | Trim Loss as Low as 3%
- (Slit)
- March 14, 2012, ... You have effectively lost one full inch, based on one-half inch on each side. Therefore, that one inch scrap translates into a 5.5% edge trim loss. A two-inch cut makes it worse, doubling the loss to 11%.” ...
- drupa Preview | Exhibitors Launch New Products
- (Carton Box)
- March 08, 2012, ... need to cut the plates to fit a dedicated vacuum zone thus allowing the use of cut-off scraps. The ThermoFlexX solution also features ergonomic plate mounting and its hybrid drum offers flexibility of ...
- Slitting/Rewinding | AccuFilm Adds 3 ASHE Machines
- (Slit)
- March 05, 2012, Will help reduce scheduling bottlenecks for its converter-customers and slit difficult-to-process specialty films. COLUMBUS, OH | AccuFilm, a custom contract slitting company, recently installed ...
- Dyna-Purge System Purges High-Temp Resins
- (Coating/Laminating)
- February 08, 2012, ... is more effective than mechanical (abrasive) and chemical purging compounds for high-temperature resins, resulting in reduced scrap rates and improved changeover times." The company commissioned the ...
- Erema Sells Recycling System to Jadcore
- (Green)
- February 04, 2012, ... their understanding of how challenging some of today's scrap materials have become for reprocessors,” says Doti. “The TVEplus meets these challenges head on." The 1514 version is capable of 2,000 lbs/hr ...
- Webinars
- (Events)
- October 16, 2011, ... enable smart converting to automate their process and produce less scrap, while securing business by delivering defect-free material. Presenter: Shomari Head, Global Product Manager- Maxcess Vision Systems ...
- PCR Milked for Flex-Pack
- (Flexpack)
- August 21, 2011, ... At present, says Harji, the plant is sending minimal scrap to landfills. “Now, with our new line, we are pulling waste out of them as well. As things are progressing, very shortly we will be at net ...