Search
- Static electricity can be a very costly problem
- (Magazine)
- August 31, 1998, ... want to run higher quality products at higher speeds, and dust will lower the quality of laminated products, coated products, and printed products," says Kessler. "The bottom line is that static costs the ...
- Finding a simple solution to a shocking problem
- (Magazine)
- March 31, 1998, ... as it's being converted, especially if it's being laminated onto something else." For a customer-driven company, this was an unacceptable situation. Favorite Plastics already had a static control system ...
- Pointing finger places blame but won't solve the proble
- (Magazine)
- November 30, 1996, ... packaging industry does not work properly. The construction might be as simple as one flexible substrate laminated to another with an adhesive. It can also be considerably more complex, with inks, adhesives, ...
- Flexible packaging converter treats its customers right.
- (Magazine)
- October 31, 1996, ... producing high quality laminated products for the snack packaging industry. Presses include a five-color Wolverine stack press; two six-color Comexi central-impression presses; and a six-color Kidder ...
- Popcorn packaging leads converter down new paths.
- (Magazine)
- October 31, 1996, ... experience, explains VP and general manager Eric Jackson. The Phoenix product is a printed, laminated sandwich of susceptor film between two paper layers. Himac supplies the metallized polyester susceptor ...
- Partnering launches future growth in laminations
- (Magazine)
- August 31, 1996, ... in Winnipeg, Canada, as well as a slitting operation in Massachusetts. Chase & Sons moved the slitting capabilities to the new Webster plant and utilized laminated master rolls from the Canadian site (thus ...
- Laminator adds metallizing to the mix
- (Magazine)
- August 31, 1996, ... laminated substrates to customers throughout the US and Canada. "We are a primary supplier," says CEO Ralph Goldman. "We don't do any printing. We supply either sheets or rolls of laminated foil on paper ...
- Taking the measure of surface treatment is a learning process
- (Magazine)
- August 31, 1996, ... of laminated films - particularly with the growing popularity of water-based inks, coatings, and adhesives. The surface energy of a solid polymer cannot be measured directly because solids typically ...
- Gauging system lights the way
- (Magazine)
- August 31, 1996, ... is subsequently attached. Then, the coated substrates pass into a drying oven for curing. Finally, the two coated substrates are laminated together to produce the finished BKL roll-form EL material. ...
- Gravure winners go for gold
- (Magazine)
- July 31, 1996, ... bags, printed by Graphic Packaging Canada Corp., Winnipeg, Canada. The final laminated structure promotes a three-dimensional image for a fresh-baked look. Engraver: Southern Graphic Systems (Canada); ...
- Canadian show highlights packaging industry up north
- (Magazine)
- June 30, 1996, ... B.C., has distributed its line of laminated printed flexible materials in North America for over ten years. Produced in two plants located in Singapore and Southeast China, Ye Ming's products are used in ...
- AIMCAL Selects Seven for Annual Honors
- (Magazine)
- March 31, 1996, ... and extrusion laminated via a 7# low-density polyethylene to 60-ga Torayfan PC-1 metallized, biaxially oriented polypropylene. The BOPP layer is extrusion laminated via a 7# LDPE to 1.25-mil Sigma film. ...
- Innovation is a winner in FPA competition
- (Magazine)
- March 31, 1996, ... ferret food since this package was introduced). The structure combines coated nylon film adhesive-laminated to an opaque polyolefin sealant, totaling only 2.75 mil thick. It provides an improved moisture ...
- New hot stamper does more for short runs
- (Magazine)
- February 29, 1996, ... followed by a prismatic silver border around the black. This printed construction is then laminated on the Franklin with a 1-mil, pressure-sensitive-coated polyester (also from Westkote). The matrix is ...
- Custom coating operation is a clean winner
- (Magazine)
- February 29, 1996, ... Rexam Custom's Netherlands plant sets its own high standards of quality. Rexam Custom, a specialty supplier of custom coated and laminated products, operates six facilities in the United States, the ...
- KAPCO hits grand slam in pursuing custom markets
- (Magazine)
- November 30, 1995, ... (Painesville, OH) p-s adhesive-coated liner, using the KAPCO-designed and -built 60-in. laminator. The laminated felt/p-s adhesive/liner construction is slit on a Dusenbery (Randolph, NJ) Model 635 shear ...
- Converting capabilities grow in Caribbean nations.
- (Magazine)
- September 30, 1995, ... -laminated PE and oriented polypropylene products. Ultima Poly Extruders also extrudes, prints and laminates PE and PP in Barbados. The Dominican Republic (pop. 8 MM) has a flex-pack industry estimated ...
- Two-component adhesive system eliminates mixups
- (Magazine)
- June 30, 1995, ... adhesive proportioning system. CSD/WestPac now averages around 700 fpm but has targeted 1,000 to 1,200 fpm. The coat weight hovers between .7 and .8 lb./3,000 sq. ft. of laminated ream. According to Ruppert, ...
- Book details Japan's packaging industr
- (Magazine)
- May 31, 1995, ... tray, composite can for beverages, molded pulp tray, molded pulp cushioning material, laminated tube, multilayer plastic blow-molded bottle, polyacrylonitrile thermo-formed container, household plastic ...
- Conserving weight, space earns praise for flexible
- (Magazine)
- March 31, 1995, ... package costs 25% less to manufacture than the previous canister. The packaging structure uses foil for moisture vapor protection laminated to Valeron for its puncture resistance. It requires a multiple-pass ...