Search
- Web Lines: Your Guide to Web Guiding | Part 1
- (Web Guiding)
- February 28, 2010, ... Rollers This seems like a simple one, but the web should stay on the face of the rollers and not track over the end of the roller. For most idler rollers, this is usually 2 in. or more. For a 58-in.-wide ...
- Square Equipment With Precision
- (New Products)
- December 31, 2009, ... squaring machinery and equipment; setting up presses; checking machine tools; aligning guide rails; establishing parallelism among web rollers, idlers, and take-up reels; and a wide variety of other measuring ...
- Roll Alignment Offered
- (New Products)
- October 31, 2009, The Roll Adjuster alignment tool, said to be easy to set up, is placed on the top of a master roller, drive shaft, or idler, and is held in place by a The Roll Adjuster alignment tool, said to be easy ...
- Modular Fluid Coating System Eliminates Setup and Speeds Switch to Slot Die Coating
- (News | New Products)
- October 27, 2009, A complete slot die coating station with all components from idler roll to backing roll is now available for renting by manufacturers... A complete slot die coating station with all components from idler ...
- Dissipating Static
- (Static-Beat)
- September 30, 2009, ... In Figure 1, PP film runs over a hard-coated aluminum idler roller. The film already has some negative charge because it has touched some rollers. When different materials touch and separate, one will ...
- WHAT'S NEW PRODUCTS: Narrow Web & Labe
- (Narrow Web)
- September 30, 2009, ... narrow web tension transducers can measure light to heavy running tension on web widths from 6-20 in. Transducer is a bearing-mounted, cantilevered idler roll with integrated dual tension sensors. It measures ...
- How To Prevent Winter Static
- (Static Elimination)
- August 31, 2009, ... when the film slips and slides over low-wrap rollers. Check the bearing drag using a simple spin-down test as described in “Web Lines: The Spin on Idler Roller Testing,” by Timothy J. Walker, PFFC June ...
- How To Prevent Unwinding Roll Static
- (Static Elimination)
- July 31, 2009, ... charge on one surface and negative charge on the other surface. The voltmeter measures VUNWIND where the film is wrapped around an idler roller as close to the unwinding stockroll as is reasonably possible. ...
- WHAT'S NEW PRODUCTS: July 200
- (New Products)
- June 30, 2009, ... aluminum idlers handle web widths from 30-130 in. Additional idlers can be specified. Coast Controls | 800-513-2345 | www.coastcontrols.com Circle 416 or visit www.freeproductinfo.net/pff Dynamic ...
- Narrow Web Transducer Measures Light/Heavy Tension
- (News Eclips)
- May 27, 2009, ... a bearing-mounted cantilevered idler roll with integrated dual tension sensors that mount on a single-sided machine frame in the web path. Said to measure total web tension across the roll face regardless ...
- NEW PRODUCT DIGEST - May 2009
- (New Products)
- April 30, 2009, ... Circle 403 or visit www.freeproductinfo.net/pff Idler Bearings Stand High Temps Custom designed low-friction idler bearings are engineered for low tension, fast-moving lines, even at elevated temperatures. ...
- Static Specified
- (Archive)
- March 31, 2009, ... solvent coaters. The sensor used to measure the electric field is permanently mounted so it is about 10 mm from the film. The measurement location is the center of the film on a span midway between idler ...
- What's New Products: March 200
- (Magazine)
- February 28, 2009, ... points in the web path. Robust, dead-shaft idler roll has high-accuracy tension sensors built into each roll end. No assembly is required. Dover Flexo Electronics | 603-332-6150 | www.dfe.com PFFC-ASAP ...
- What's New Products: Februar
- (Magazine)
- January 31, 2009, ... conventional AM technology). ◆Kodak | 866-563-2533 | www.graphics.kodak.com PFFC-ASAP 417 Mounts for Idler Rolls Three pre-engineered mounts are said to simplify and speed dead shaft idler roll ...
- What's New Product
- (New Products)
- November 30, 2008, Rolls Aid Web Control Idler rolls feature hundreds of precision-machined grooves that allow air to escape from between the roll and web to provide better Rolls Aid Web Control Idler rolls feature hundreds ...
- Do You Have a Need for Speed?
- (Web Lines)
- September 30, 2008, ... grow beyond the web or roller roughness. Too much air lubricates web-roller contact, reducing the traction to drive the web and idler rollers or hold the winding roll together. Too much air entrained in ...
- TOP 10 EClips PFFC's electronics clipping service for converter
- (New Products)
- February 29, 2008, ... PFFC-ASAP 309 #6 Web Cleaning Sleeves Are Disposable Jemm-Tac web cleaning sleeves slide over existing idler rollers, reportedly eliminating the need for special roller cores. The rubber sleeves ...
- Products
- (New Products)
- December 31, 2007, ... PFFC-ASAP 419 Keep Rollers Turning Jemm-Trac T traction tape is a covering used on idler rolls to keep rollers turning. Can be used on coaters, laminators, flexo presses, as well as blown film lines. ...
- Differential Winding Limits: Part II
- (Magazine)
- November 30, 2007, ... to lock onto hard plastic or metal cores. Differential winding after a well-wrapped surface drum or several idler rollers will have limited ability to pull out anything, but they have the most extreme ...
- WHAT'S NE
- (Magazine)
- August 31, 2007, ... need for tapes and cork, roller coverings slide easily over existing idler rolls, making them suitable for most applications. Jemmco | 262-512-9559 | jemmco.com | PFFC-ASAP 418 Add Benefits to ...
