Search

From the Tosaf development laboratory: PFAS-free additives for the plastics industry

(News | New Products)

January 22, 2024, ... and for the pressure reduction in the extruder die were largely consistent. The comparison of the optical properties – light transmission, haze and clarity – even showed slight advantages of the PFAS-free ...

World’s Largest VCI Film Plant is Increasing Capacity with New State-of-the-Art Extrusion Line

(News | New Products)

January 11, 2024, ... co-extruder required manual adjustment and could only run at approximately 60% of the new extruder capacity. This improvement will greatly increase efficiency for both specialty films and any standard ...

New ZSK FilCo Filtration Compounder for Higher Product Quality and Reduced Energy Consumption in PCR and Polymer Recycling

(News | New Products)

January 09, 2024, ... waste plastic is fed into a ZSK twin screw extruder, where it is melted, homogenized and devolatilized. The melt is then fed through a filter to remove all contaminants before it is fed back into the same ...

GOEBEL IMS Supports Growth of Guangdong Decro Film New Materials

(News | New Products)

November 08, 2023, ... that total more than 187,000 square meters. Currently, DECRO runs seven international advanced BOPP lines, two functional coating lines and 10 twin-screw extruders for functional Masterbatch. The company ...

The Importance of Specifying Your Corona Treater When Ordering a New Line Through an OEM

(Surface Prep)

October 22, 2023, ... converters and extruders to pay special attention to the corona treater being supplied with their new OEM lines. Buyers of new OEM lines who take a passive approach to the make and model of the corona ...

Improve Quality by Corona Treating Films Prior to Converting

(News | New Products)

June 25, 2023, ... in-line prior to converting. You might wonder why converters need to do this if they purchase pretreated films from film extruders. This secondary treatment is needed because the effects of corona treatment ...

Interview with Ryan Schuelke, Enercon President & Chief Sales Officer

(News | New Products)

April 23, 2023, ... each OEM, converter and extruder to optimize performance for their specific needs. And, our laboratory is the only one that offers corona, plasma & flame making it the ideal place for customers to prove ...

Oerlemans Specifies Vetaphone for New Extrusion Lines

(News | New Products)

April 18, 2023, ... which itself has two locations in Genderen and Giessen, Plasthill, Perfon, Oosterwolde Plastic Industrie, Fardem Packaging, Flexpak and Stempher. The Group employs 760 people, has 88 extruders, 35 flexo ...

Treat. Cure. Clean. Repeat… With Baldwin at ICE Europe 2023

(News | New Products)

March 06, 2023, ... hand-cleaning. By automating this process, film extruders avoid stopping the line for debris buildup on the cylinder surface, eliminating restart waste and web-breaks, and dramatically increasing operator ...

Make Better Films with Enercon’s Leading Surface Treating Technology & Support

(Surface Prep)

February 06, 2023, ... & reliability. Application Expertise Our application experts help converters and extruders define their surface treating requirements and then configure a custom solution for their operations. Whether ...

Dinpe Chooses Vetaphone for Better Quality Extrusion

(News | New Products)

February 06, 2023, One of Argentina’s leading extruders of mono- and multi-layer PE films, Dinpe SA, has installed Vetaphone corona technology at its plant in San Juan, in the west of the Argentina Republic. One of ...

Converting Machinery Built for Your Evolving Demands

(Coating/Laminating)

January 23, 2023, ... for industrial materials A proven range of extruders, feedscrews and control systems Automatic profile control (APC), air rings, deckle and die options, multi-coating solutions, web handling, winding ...

Davis-Standard Announces EPIC IV® Control System

(News | New Products)

December 20, 2022, ... monitored include extruder reducer, lubrication system, motor characteristics, drive power unit, barrel heating and cooling functions. The EPIC IV® will replace the EPIC III® as the standard offering ...

The Griff Network Acquires Atlas Metallizing Inc.

(News | New Products)

October 13, 2022, The Griff Network, a manufacturer, extruder, coater, laminator and metallizer, has completed the acquisition of Atlas Metallizing in New Britain, CT.  The Griff Network, a manufacturer, extruder, ...

Sustainable Machinery Performance and Smart Factory Solutions Brought To You By Davis-Standard at K2022

(Upcoming Conference News)

July 24, 2022, ... options, process and equipment technology algorithms. A live demonstration of how customers can benefit from this technology will be given during the show.   SHO Extruder (3.5-inch, 90mm) – Equipped ...

Davis-Standard Introduces Next Generation Gear Reducer

(News | New Products)

May 31, 2022, ... housing. We already have hundreds of extruders fitted with the new reducer in the field. Customers across all Davis-Standard applications are pleased with the results.” The new gear reducer is available ...

Vetaphone Boosts its Support for American Customers

(News | New Products)

May 17, 2022, ... the inventor and leading manufacturer of corona surface treatment – Vetaphone – has moved to boost after-sales support to its rapidly growing list of printers, laminators, converters and extruders.  The ...

Davis-Standard presents at PTXPO

(News | New Products)

March 11, 2022, ... model to conventional rollstand designs and describe the benefits of AGT’s increased automation and roll control. The presentation will include a discussion on upstream extruder arrangements, requirements ...

5 Ways Pouch Converting Technology Can Protect Your Materials Investment

(Bag Pouch)

March 06, 2022, Thanks to dazzling artwork and the latest in science and technology, from the extruder to the printer to the laminator, today’s packaging film is eye-catching and durable. By Scott Fuller, Pouch Equipment ...

Davis-Standard to Market Nonwovens and Converting Solutions at Techtextil North America

(News | New Products)

March 02, 2022, ... fabric coating applications and engineered textile composite applications. This includes extruders, controls, feedscrews, unwinds and winders, laminators, extrusion coaters, and web handling equipment. ...