Search
- Hot Foil Stamp Smaller Runs
- (New Products)
- April 30, 2010, ... foil unwinds with an automatic pneumatic foil tension control system. Said to provide cost savings while keeping company's high-pressure capabilities with additional dwell time on impression. Matik ...
- Narrow Web's Leverag
- (Label/Tape)
- March 31, 2010, ... has a bearing on the settings necessary for creating a pouch. Heat, pressure, and dwell are the three ingredients necessary to create a good seal for a pouch. The seal initiation temperature is the ...
- Flexible Packaging: Narrow Web's Leverag
- (Flexpack)
- March 21, 2010, ... and dwell are the three ingredients necessary to create a good seal for a pouch. The seal initiation temperature is the melting point of the sealant layer, and the amount of time the seal jaws are closed ...
- Stamp of Approval
- (Carton Box)
- December 31, 2009, ... for the hair coloring market. The Gietz Foil Commander offers very high speed and the ability to have extended dwell time up to 2.5 sec. The patented “Vacufoil” foil transport system allows the feeding ...
- Carton & Box Reporter
- (Carton Box Main)
- September 30, 2009, ... treater. Tom Vogel, Green Bay Packaging's plant engineering manager, says, “Previously, folder/gluer press speeds were limited by glue application speed and dwell time. With atmospheric plasma surface ...
- Spool Rules
- (Winding Unwinding Rewinding)
- August 31, 2009, ... Stroke Length | The precise linear distance of overall spool traverse (spool width) Pitch | The precise linear traverse movement per spool rotation End Dwell | The amount of rotational dwell at each ...
- Green Bay Packaging's Folding Carton Div. Installs Plasma Treate
- (News Eclips)
- July 20, 2009, ... folder gluer press speeds were limited by glue application speed and dwell time. With atmospheric plasma surface treatment press speeds can be significantly increased while maintaining and even improving ...
- Crowning Benefits
- (Web Handling: Main)
- February 28, 2009, ... an unbalanced pull because of an unequal dwell time of the substrate in the nip. This wrinkling can be made worse by downstream pull rollers that actually pull the web as the uneven nip is holding the ...
- Blister Paperboard Is 100% Recyclable
- (News Eclips)
- November 04, 2008, ... required special equipment, and the resulting seals require standard industry sealing conditions at 360 deg F/3 sec dwell time/60 psi. Said to accommodate high quality graphics, has no crushed areas, and ...
- What's New Product
- (New Products)
- October 31, 2008, ... equipped with an auto-return bail to hang level when empty, saving time and effort. Models are available in 1- and 2-ton capacities. The Caldwell Group | 800-628-4263 | www.caldwellinc.com PFFC-ASAP ...
- RF Web Dryer Is Eco-Friendly
- (News Eclips)
- July 22, 2008, ... temperatures, and provides up to 80% energy savings. Eliminating the long dwell times associated with conventional heating methods, the Macrowave RF Drying System reduces makeready because RF power ...
- Drying Part 2: Computer Simulation
- (Inks/Coatings/Primers)
- February 29, 2008, ... between-station dryers could dry the ink only somewhat due to the minimal dwell time. In practice, this can lead to the need to space traps on the press. A standard water ink based on a blend of 85:15 ...
- New Products
- (Magazine)
- July 09, 2006, ... and fits in a 36x43-in. floor space. PFFC-ASAP 405 Butt Splicer is Automatic CTC Intl., West Caldwell, NJ; 973/228-2300; ctcint.com Model C-TAB-62-10 Turretmaster automatic butt splicer ...
- Without Boundaries
- (Magazine)
- August 30, 2005, ... to avoid web distortion, and dwell time was maximized to allow for maximum adhesive flow. One other element that makes the process so challenging is that the film composite is six layers thick, which ...
- New Product Digest, Part 2
- (Magazine)
- December 30, 2004, ... stations while delivering higher surface energy levels. Features an air flow and exhaust system that results in an ozone-safe work area; high-efficiency rectangular ceramic electrodes for increased dwell ...
- Analysis of Film Extrusion Problems with Flow Simulation
- (Magazine)
- September 29, 2004, ... For example, a die should also have good “self-cleaning” or purging characteristics so that the dwell time of the material is minimized with concomitant decrease of polymer degradation. This is especially ...
- Optimum Release
- (Magazine)
- April 29, 2004, ... months at ambient temperatures and 50% relative humidity. Thermal solventless silicone coatings for unprimed PET require some trade-off between dwell time and temperature to achieve anchorage. They ...
- Drupa New Product Digest
- (Magazine)
- March 30, 2004, ... and texturing, but also for flat foil stamping on heat-sensitive substrates. Offers an adjustable dwell time under pressure. Visit Hall 3, Stand B53 at Drupa. CTP Plate Suited to All Substrates Kodak ...
- Products
- (Magazine)
- January 30, 2004, ... board from E-flute to AC-fluted double-wall. Features are said to ensure maximum registration control, additional dwell time to facilitate drying, and enough space to accommodate the addition of dryer ...
- Materials
- (Materials)
- November 29, 2003, ... consumer electronics; and hardware. Tear-proof foldover board is reported to be economical and to allow packagers to run their equipment more efficiently due to shorter dwell times and lower temperatures ...
