Search

Siemens Extends Sinamics G120 Line

(Controls)

September 05, 2014, ...  All versions of the new modules are rated IP20. However, an optional push-through version is available, allowing the heat sink to extend out the backside of the cabinet. The seal for the push-through ...

Jemmco Announces Web Cleaner

(News | New Products)

October 28, 2013, ... from the moving web, company says. The JemmTac Pre-Sheeted Adhesive Paper is nipped onto the backside of the JemmTac Sleeve, enabling it to clean the sleeve continually. The new JemmTac Component Style ...

LAB/PILOT/TECHNICAL FACILITIES DIRECTORY

(Uncategorized)

August 31, 2013, ... line speed; range of thicknesses: 0.5–10 mil (range of base thickness: up to 250 um); dryer type: floated and backside idlers; 2–10 zones; dryer capacity: 15,000 cfm; UV curing; solvents: water, flammable, ...

Coating Matters | Fluid Flow Phenomena

(Coating/Laminating)

May 14, 2013, ... by the roughness of the substrate or impurities in the fluid. Many times an estimation can be done, but process experimentation provides the best feedback. Visualization of the coating bead on the backside ...

Enercon Webinars to Cover Treating & Web Handling

(News | New Products)

February 11, 2013, ... stresses during processing as well as actual consumer usage, company explains. While most of these polymer films are durable enough under tensile stresses, they are prone to wrinkling and backside treatment. ...

FLEXcon Release Liner Features PCW

(Label/Tape)

October 04, 2012, Release liners for the narrow web film label market feature up to 30% post-consumer waste, thanks to a joint effort between FLEXcon and Wausau Paper   SPENCER, MA | FLEXcon is offering post-consumer ...

New Product Name, New Calipers at Dura-Fibre

(Carton Box)

August 15, 2012, ... superior print surface, while the backside natural kraft liner provides durability. “We want to assure our existing and new customers that we still offer the same quality product but under a new name ...

On Print | Low Migration UV-Cure Inkjet Inks

(Flexpack)

May 21, 2012, ... from the ink layer to the backside of the film The first depends on both the chemical and the film—for example polyester is a much better barrier than polyethylene. The second depends partly upon correct ...

Does Coating Neutralize Static?

(Kelly on Static)

April 01, 2012, ... static. So, let’s take a closer look. Figure 2: Coating does not neutralize static                on the backside. Opposite charges                in coating balance backside static. Figure ...

Static Beat | Control Static at the Corona Treater

(Static-Beat)

March 12, 2012, ... a backside discharge occurs at the exit nip where the web peels from the treater roller. Backside discharge is the secondary source of charging. This backside discharge deposits oppositely charged static ...

Static Beat | How To Eliminate Hot Rolls

(Static-Beat)

January 16, 2012, ... static. Locate an ionizing string or static bar just after the CDT unit to neutralize static on the treated surface. Static must be neutralized before the backside or untreated surface touches a roller. ...

Surface Treating: Promoting Adhesion

(Surface Prep)

February 28, 2011, ... definition” discharges with ultra-high homogeneity and uniformity, leading to higher density and higher surface energy effects. Reductions in the incidence of material wrinkling and backside treatment ...

Static Beat: Charge Control Antistatic Layers

(Static Elimination)

January 31, 2011, ... increase in surface roughness improves both static performance and wound roll integrity by increasing the coefficient of friction. In addition to improving static performance, the backside layer also may ...

Laminating Corona Treating: Bond Boosting

(Corona, Flame, Plasma)

July 31, 2010, ... pin holing, and backside treatment. The high definition treaters raise the surface energy of the OPP and PP substrates to optimize the bonding surfaces for laminating. Supplying power to the corona ...

WHAT'S NEW PRODUCTS: Narrow Web & Labe

(Narrow Web)

September 30, 2009, ... printing up to eight colors on one side of the web and another configuration accommodates backside printing. Press includes individual servo drives to each anilox, plate, and impression roll. Options include ...

Plasma Power

(Archive)

April 30, 2009, ... consider high-definition corona systems in which optimized dielectrics are used to minimize filaments, pin-holing, and backside treatment potential. Gas (Chemical) Corona Gas or chemical corona treatment ...

Dyne Levels Part 2

(Process Management)

June 30, 2008, ... and long-lasting treatment levels; no backside treatment; elimination of ozone production; and longer-lasting treatments. Corona is the most widely used surface treatment method, but developments in ...

What's New Product

(Magazine)

March 31, 2008, ... burnout, and provides insurance against pinholing, backside treatment, and film wrinkling. Enercon Industries | 262-255-6070 | www.enerconind.com PFFC-ASAP 422 No Gear Changes Needed Uhing rolling ...

Jemmco Introduces EZ Read Poly Test Pens

(Archive)

May 09, 2007, ... treatment levels between 38 and 40 dyne/cm. This pen is said to be ideal in production situation for quickly determining the presence of treatment. It also can be used to identify backside treatments. ...

New Product Digest

(Magazine)

April 30, 2007, ... 408 Eliminate Backside Treatment Enercon Industries, Menomonee Falls, WI; 262/255-6070; www.enerconind.com New Plasma3 atmospheric plasma system has the ability to modify surfaces unresponsive to ...