E-Newsletter

Digital Magazine

Plasma Replaces Propane Torch to Improve Print Adhesion on PE Pipes

As one of the largest manufacturers and distributors of piping in Canada, CB Supplies is continuously looking for new technologies to improve efficiencies and support environmental conservation. Its recent investment in Enercon in-line Plasma Treaters to enable inkjet printing on various polymers has reduced labor and operating costs while improving throughput.

CB Supplies manufactures three types of polyethylene pipes: high-density polyethylene, cross-linked polyethylene (PEX) and polyethylene raised temperature (PERT.) CB Supplies needs to print on pipes to identify the brand, sizing, lot number, date and other important information. However, these polymers have very low surface energy, which makes them difficult to print on.

The company had been using oxy-acetylene or a propane torch to prepare the surface of the piping prior to printing. While this worked to achieve the adhesion needed for the ink to stick, the overall process was very costly and inefficient. Replacing gas canisters caused downtime and the torch’s open flame posed a safety concern for plant personnel.

An internet search led them to Enercon’s website where CB Supplies reportedly learned about the benefits of in-line plasma treatment. Plasma treaters clean, etch & functionalize surfaces to remove contamination, increase surface energy, create bonding sites and activate the surface to promote ink adhesion.

To verify the technology would be a fit for its application, CB Supplies sent Enercon samples of the different pipes. Enercon conducted laboratory trials to identify which plasma technology would work best for the application. An Enercon Blown-Ion™ plasma treater was recommended.

The system generates a concentrated plasma that bombards surfaces with a high-speed discharge of ions. Surfaces are micro-etched to remove organic and inorganic contaminants. This air plasma technology is very popular because it is effective, easy-to-use and inexpensive to operate.

In May 2020, the company installed its first Enercon plasma that seamlessly integrated into its production line prior to the inkjet printer. Since then, CB Supplies has purchased five additional Blown-ion Plasma Treaters.

For more information, visit https://www.enerconind.com.

Каждый может изучить с ними в открытом доступе, чтобы mostbet оценить работу конторы со всех стороны.

Sun Chemical HD Plates

Subscribe to PFFC's EClips Newsletter