Mark Miller helps you identify the right material selection for tooling that will carry fluid to your substrate.Read more
Product and Technology of the Year Awards praise Hazen for Titleist golf ball sleeves and cartons and SAM N.A. for slot die with internal …Read more
Web handling expert Tim Walker offers three options for this machine direction folding process.Read more
Marketing expert Mark Lusky offers 3 tips to help you rev up your reputation and credibility in the marketplaceRead more
News | New Products
Frito-Lay floor stand honored as Temporary Display of the Year and Most Creative Temporary Display
Demand for space is said to be strong for the 2016 trade fair for plastics and rubber, with 3,000 exhibitors expected to fill the halls
The 3600 Series undergoes an engine upgrade to run at higher speeds, reportedly with no loss in print quality
The Solution Coating Technical Center will offer customer trials and demos, toll coating, and R&D for the coating industry
The Tau 330 UV inkjet digital label press is said to provide up to 2 hours of uninterrupted printing, fewer changeovers, and less downtime
The DSS Compact Coex die is said to provide many benefits with less height and weight
The SPI Automatic Film Splicer performs non-stop film changes in food and beverage packaging operations
Directories | Reports
PFFC brings you exclusive White Papers from our online sponsors.
Visit Kelly on Static from Static control expert Dr. Kelly Robinson, president of Electrostatic Answers; Kelly has 27+ years of experience in problem-solving and consulting.
Visit Tim's Web Lines to handle and wind your paper, film, foil, and similar products. Take advantage of Tim’s 25+ years just like over 100 converters have.
Visit Mark's Coating Matters from fluid coating expert Mark D. Miller; Process improvement and project management for precision roll-to-roll coating applications.
Visit Marketing Mojo for dynamic marketing insights from Stephanie Millman that inspire new ideas on how to stay on top of your customer’s mind.
Visit Yo’s Yarns to share the thoughts, impressions, experiences, and news that impact the converting industry. . . or anything else that happens to be on her mind!
Visit Tom's Poly Ploys, where Tom will be writing on various topics that the typical polymer processor would encounter on the job.
- October 01, 2002, Stanley Sacharow, The Packaging Group
Long overshadowed by the US but considered to be one of the finest countries in the world in which to live, Canada (pop. 35 mm) is rapidly becoming a regional hub of flexible package converting.
Over the last decade, the industry has grown dramatically, from $350 mm (US) in 1990 to more than $800 mm (US) in 2001. More flexo presses are sold in Canada than anywhere else in the world. The province of Ontario has an estimated 60 flex-pack converting plants. In Quebec there are almost 40 flex-pack converters of varying sizes. Industry experts rate the Ontario market alone as about $500 mm (US), more than 50% of Canada's total market.
Why the sudden growth in flexible packaging in Canada? One reason is the easy entry into the huge US market. Prodded by the North American Free Trade Agreement (NAFTA), there has been a significant increase in stateside volume.
A flourishing “entrepreneurial spirit” dominates the small/mid-size Canadian converter, opening a dramatic growth in $15 mm to $40 mm (US) converters.
The favorable rate of exchange of the Canadian dollar makes the Canadian flex-pack converter a low-cost producer of material. Also important and overlooked in the rush toward globalism is the Canadian niche in small to mid-size runs. Canadian flex-pack converters often can manufacture such runs profitably. Multi-language requirements are handled as a matter of course, and overall design parameters are superb.
Added to all these positives is the rather unique character of Canada's packaging industry. It's the nation in North America where Tetra Pak first launched its aseptic carton in 1975 — several years prior to US introduction. And, where hot-filled juice cartons have been on the shelf for more than nine decades. Canada's small, sophisticated, and European-oriented (particularly in Quebec) market often has been a proving ground for other packaging developments such as “sous-vide” and absorber/adsorber technology.
Winpak (est. 480 mm US) has ten plants in Canada. It is the North American flexible packaging arm of Winpak, a sub. of the Finnish privately owned conglomerate Wihuri Group. The firm produces up to nine-layer coextruded film for the processed meat/cheese industry. A leader in the Canadian flex-pack industry, the company is also a pioneer in MAP packaging and high-tech extruded products.
One of Winpak's plants extrudes a broad range of specialty — primarily single-layer — PE (polyethylene) films and also has coextrusion capabilities. The other plant serves a market segment requiring specialty multilayer films generally involving a high-barrier component. Approximately 50% of the company's specialty film sales are to the converter market, 20% to the food industry, 17% to the industrial market, and 13% to the medical sector.
One of the other major flex-pack converters in Canada is Bonar Packaging (est. $75 mm US), Burlington, Ont. Part of the Hood Packaging (US) organization, Bonar is among the top five of North America's largest converters of pet food bags. The company has seven flex-pack plants in Canada; two large ones are in Burlington, Ont., and Calgary. Manitoba. In addition to state-of-the-art UV (ultraviolet) curing capability, Bonar has a wide range of bagmaking equipment, printing presses, extruders, and in-line laminating machines. Although its product output is limited largely to pet food bags and is somewhat less versatile than many other Canadian flex-pack converters, its plants produce a wide range of sophisticated flex-pack constructions. And these are only a few of the many vibrant flex-pack converters in Canada.
Stanley Sacharow has been in the flexible packaging industry for more than 35 years. His company, The Packaging Group, is an organizer of targeted conferences and a consultant to the international packaging/converting industry. Contact him at 732/636-0885; firstname.lastname@example.org