E-Newsletter

Digital Magazine

Gibson Box Switches to Automated Gluing System

ASH FLAT, AR | The Gibson Box Co. has produced corrugated pallets, build-ups and other packaging products since 1999, but company president David Gibson would turn back the clock four years if he could. That is when Gibson first considered purchasing its recently acquired Haeco Engineered Gluing System (EGS). The automated EGS has dramatically boosted the company’s bottom line, cutting gluing operations labor by 80% and reducing glue usage by two-thirds.

Haeco EGS

“I kick myself for not doing this sooner,” said Gibson. “As the economy tightens, we have to keep a close eye on labor costs, and adhesive costs continue to rise as well. The EGS has helped us control both, and customers are commenting on the high quality of our work. This machine is a tremendous asset.”

Gibson Box is a small-sheet plant in that produces custom packing materials for companies shipping computer components, medical supplies, car parts, bathroom cabinets, and similar products. Customers send custom specs for build-up blocks, laminate pads, honeycomb void fillers, or other packing structures, and the plant converts corrugated and foam sheets using automated folders, cutters, and labelers.

The company was hand gluing the structures as recently as September 2012, applying hot melt or light glue using roll coaters. “Gluing was the bottleneck, as well as the ‘big variable’ when it came to estimating lead times and project costs,” said Gibson. “Our orders can be anywhere from a pallet to a truckload, and our profitability depends on how accurately we estimate labor and material usage. With the automated gluer, we have better control of our operations. We know exactly how long it takes to process a truckload and how much glue we need to complete the job. It’s something we, and our customers, can depend on.”

Gibson’s gluing system includes a manual stacker, bridge/manifold assembly, and on-board water wash. The EGS is also available with auto-feed, auto-stack, and compression units. The squaring and compression sections at Gibson are 35 sq. ft. each. “The increased efficiency of our gluing operation has allowed us to not only keep up, but work ahead,” said Gibson. “We used to be able to process only what was released by the customer the previous day, and couldn’t build any inventory. Now, we can get the whole order done in a day and set it in the warehouse until the next truck arrives.”

Glue usage is another area where the EGS has impacted Gibson’s profitability. “The cost of glue is like the cost of gasoline, the price goes up, but rarely comes back down,” said Gibson. “When we were hand-gluing, we could usually complete one large order for every drum of glue we used. With the EGS we’re getting three orders per drum, so the machine is paying for itself in glue savings alone.”

All EGS’s are custom configured to customer specs in regard to sheet width, number of control channels, and either automatic or manual stacker. Gibson’s is configured to handle sheets up to 5-ft wide and includes six cold-glue valve assemblies and applicators, as well as a four-channel control with selector switches and a low-volume, low-pressure pump. Multiple channels on the control and individual valve control provide the flexibility to apply hot melt or liquid adhesive patterns in precise locations. The control configuration is customized depending on the desired glue patterns, and each control channel provides a different pattern based on the selected glue lengths and gaps.

“We’re able to produce higher, more consistent quality because the setups and the glue patterns are the same every time. We know we’re going to get a good product,” said Gibson. “Customers have been very impressed with the quality.”

The EGS has not only improved the quality of Gibson’s packing products, it has also freed up capacity to allow the company to aggressively pursue new business. “The Haeco gluer is very easy to set up, and we’re able to save our regular jobs in the control’s memory, so it’s easy to call them up, set up the job and go,” added Gibson. “But the other advantage is that our job quotes are much more accurate in regard to cost and lead time.”

Gibson’s view of large orders has also changed. “Before the EGS these big orders would take a toll on our manpower and our profitability. Now, I can’t wait for the next truck to arrive.”

This email address is being protected from spambots. You need JavaScript enabled to view it.


Safe-Slab™ Core Recycler(MD) - Blade Free Slabbing - an Appleton Mfg. Division Product

Subscribe to PFFC's EClips Newsletter